Installing The Optical Drive; Removing The Drive Cage - Dell OptiPlex XE2 Small Form Factor Owner's Manual

6. Repeat steps 3 to 5 to remove the second optical drive (if available).

Installing the optical drive

1. Insert the optical drive into the bracket.
2. Slide the optical drive to insert it into the drive cage.
3. Connect the data and power cables to the optical drive.
4. Install the cover.
5. Follow the procedure in

Removing the drive cage

1. Follow the procedure in
2. Remove the:
a. cover
b. front bezel
c. optical drive
3. Disconnect the data and the power cables from the back of the hard drive.
16
After working inside your computer.
Before working inside your computer.