Installing The Heat Sink Assembly; Removing The Processor - Dell OptiPlex XE2 Small Form Factor Owner's Manual

Installing the heat sink assembly

1. Place the heat-sink assembly into the chassis.
2. Tighten the captive screws to secure the heat-sink assembly to the system board.
3. Connect the fan cable to the system board.
4. Place the fan shroud on the fan and push to click in place.
5. Install the cover
6. Follow the procedure in

Removing the processor

1. Follow the procedure in
2. Remove the cover.
3. Remove the heat sink assembly.
4. Press the release lever down and then move it outward to release it from the retention hook. Lift the processor
cover and remove the processor from the socket, and place it in antistatic bag.
After working inside your computer.
Before working inside your computer.
29