Ispring WHOLE HOUSE WCS45KG Installation Instructions & User Manual page 17

c. Advanced Options
Press and hold "UP" and "DOWN" at the same time for 3 seconds to enter.
Press "Set/Regen" or "MANUAL REGEN." to confirm and switch to the following parameter
setting, the entire menu shown below. Use the "UP" and "DOWN" buttons to modify the value.
Press the "Menu" or "SETTINGS" button to return to the standby state immediately.
d. Regeneration Mode Options
Press the "Set/Regen" or "MANUAL REGEN." button once to enter the ''DELAYED REGEN.''
function. Use the "UP" and "DOWN" buttons to change the mode. Press "Set/Regen" or
"MANUAL REGEN." to confirm the setting. Press the "Menu" or "SETTINGS" button to
return to the standby state immediately.
Press and hold the "Set/Regen" or "MANUAL REGEN." button for 3 seconds to enter the
''REGENERATION'' setting. Use the "UP" and "DOWN" buttons to switch the modes. Press
Set/Regen" or "MANUAL REGEN." to confirm the setting. Press the "Menu" or "SETTINGS"
button to return to the standby state immediately.
www.123filter.com
UNIT SIZE:
The "RESIN VOL." is the amount of ion exchange media used in
the system.
CYCLE SETTINGS (BACKWASH, BRINE, RINSE):
The system has pre-engineered default settings for every
valvemode, unit size, and salt setting. The settings are
optimized to maximize salt and water use efficiency. The
settings can be manually adjusted. Users can adjust these
parameters at any time with the help of an application engineer
based on the water environment. Refill is automatically
calculated.
LOCK VALUE:
This setting locks the value set in the previous page, and the
end user will not be able to modify it before the setting is
changed to UNLOCK.
DELAYED REGENERATION
In this mode, the system will start a regeneration at the next
regeneration time regardless of the remaining regeneration days
or water consumption.
IMMEDIATE REGENERATION
Under this mode, the system immediately starts a regeneration.
VACATION MODE
Choose vacation mode and input estimated holiday days; the
valve will regenerate in a SMART CLEAN mode. The system will
remain in vacation mode when no water is used during the input
estimated holiday days; if there's water used, the vacation mode
will be auto-off, and the system will return to the normal working
mode.
| +1 (678) 261 - 7611 | support@123filter.com Page 15