Operation Tips; Programming The Central Softener System - Ispring WHOLE HOUSE WCS45KG Installation Instructions & User Manual

•
The product can be generally used after installation and commissioning have been completed.
With an uninterrupted power supply, the user does not need to perform other operations on the
machine.
•
The automatic regeneration start time default is to start late at night. The water is not treated and
should not be used during this time.
•
During the use of the water softener, do not cut off the power to avoid errors in the clock on the
water softener, which will affect the original regeneration start time and lead to the potential use
of unsoftened water.
•
When the water supply is shut down, the water softener should be in the bypass position. When
the water supply is restored, the faucet in the home should be opened first. When the water
supply is restored after the water supply is shut down, pollutants in the water pipe may enter the
water softener and damage the machine, leading to ion exchange resin failure. The contaminated
water should be released, and the system should return to the service position after the water runs
clear.
•
DO NOT regenerate any other softeners/filters at the same time as this system since this will
interfere with the regeneration process and cause damage.

Programming the Central Softener System

(1) Button Configuration
"Menu" or "SETTINGS"
a.
This function is used to enter the basic setup information required during installation.
•
Press and hold the key for 3 seconds to unlock the device while in standby mode.
•
In the user menu setting, press this button to exit the menu immediately.
"Set/Regen" or "MANUAL REGEN."
b.
This function is used to initiate an immediate or delayed manual regeneration.
•
In the user menu setting, press this button once to confirm the parameter setting and switch to
the next option.
"UP" / "DOWN"
c.
These buttons are used to increase or decrease the value of the settings while in programming
mode.
•
When the display is in a menu option, these keys can be used to adjust the value or option.
(2) Notes
During the menu setting process, if there is no activity within 1 minute, the system will
a.
automatically return to the standby state.
All keys will lock after 3 minutes during the standby status. Press and hold the "Menu" or
b.
"SETTINGS" key for 3 seconds to unlock.
Page 12 www.123filter.com

Operation Tips

| +1 (678) 261 - 7611 | support@123filter.com