Obligations Of The Operator; Personal Protective Equipment - SCHUNK iTENDO2 easy monitor Assembly And Operating Manual

2.8 Obligations of the operator

2.9 Personal protective equipment

01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
The operator must ensure that:
The product is only used as intended.
l
The product is only operated in a perfect and fully functional
l
status.
The correct functioning of the product is checked regularly.
l
The operating manual is always kept in a complete and
l
legible condition close to the product.
The product may only be operated and maintained by
l
sufficiently qualified and authorized personnel.
The personnel is familiar with the contents of the operating
l
manual, in particular the safety notes contained therein.
The personnel are regularly instructed in occupational safety
l
and environmental protection.
Use of personal protective equipment
Personal protective equipment serves to protect staff against
danger which may interfere with their health or safety at work.
When working on and with the product, observe the
l
occupational health and safety regulations and wear the
required personal protective equipment.
Observe the valid safety and accident prevention regulations.
l
Wear protective gloves to guard against sharp edges and
l
corners or rough surfaces.
Wear heat-resistant protective gloves when handling hot
l
surfaces.
Wear protective gloves and safety goggles when handling
l
hazardous substances.
Wear close-fitting protective clothing and also wear long hair
l
in a hairnet when dealing with moving components.
Basic safety notes
9