Malfunctions; Maintenance - SCHUNK iTENDO2 easy monitor Assembly And Operating Manual

2.12 Malfunctions

2.13 Maintenance

01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
Behavior in case of malfunctions
Immediately remove the product from operation and report
l
the malfunction to the responsible departments/persons.
Order appropriately trained personnel to rectify the
l
malfunction.
Do not recommission the product until the malfunction has
l
been rectified.
Test the product after a malfunction to establish whether it
l
still functions properly and no increased risks have arisen.
For trouble-free, long-lasting use, clean, maintain and check the
functionality of the product regularly.
Repair work may only be carried out by SCHUNK!
If you have any questions regarding maintenance and servicing,
our technicalcustomer service is available during our business
hours:
Service telephone: +49-7133-103-2956
service.toolholder@de.schunk.com
The specified maintenance intervals are based on practical
experience gathered by SCHUNK and are recommended.
Depending on the ambient and operating conditions, as well as
the clamping frequency of the product, the maintenance
intervals must be adapted and noted accordingly. For
maintenance intervals with two or more specifications, the valid
specification is the one that applies first.
After completing essential maintenance work, any required
settings and functional tests must be carried out again.
Basic safety notes
11