SCHUNK iTENDO2 easy monitor Assembly And Operating Manual page 26

iTENDO² app with easy monitor
Settings menu scale parameters of the Y-axis
Allows the settings of the scale parameters to be set and reset for
the Y-axis of the central diagram.
Process selection
The drop-down menu allows you to select a process stored in the
Wireless Receiver project to display its trend history.
Camera button
Allows screenshots of the central diagram to be taken
} 5.5
[/ 17]. The screenshots are saved in the gallery.
Display trend limits
Allows you to display the values set in the process for the trend
limits. Trend upper limit and trend lower limit values are
displayed as colored lines in the central diagram. When a trend
alarm is triggered, it is listed in the "Alarm" display mode. In
addition, Digital OUT 5 is switched for 5 seconds at the trend
lower limit and Digital OUT 4 is switched for 5 seconds at the
trend upper limit. A red dot also appears on the alarm button.
Number of bars shown button
Allows the number of bars to be selected for the data to be
displayed in the central diagram.
Manual zoom (X-axis)
Allows arbitrary zooming in or out of the diagram view from the
X-axis (number of bars) by expanding or contracting the fingers.
Manual zoom (Y-axis)
Allows arbitrary zooming in or out of the diagram view from the
Y-axis (chatter index) by expanding or contracting the fingers.
Reset view
Allows the settings of the scale parameters to be reset for the
axes and the manual zoom in the trend diagram.
Bar-specific information
Tapping the bars displays information about the individual
recordings.
26 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510