Disposal; Fundamental Dangers; Protection During Handling And Assembly; Protection During Commissioning And Operation - SCHUNK iTENDO2 easy monitor Assembly And Operating Manual

Basic safety notes

2.14 Disposal

2.15 Fundamental dangers

2.15.1 Protection during handling and assembly

2.15.2 Protection during commissioning and operation

12
Handling of disposal
The incorrect handling of disposal may impair the product's
safety and cause serious injuries as well as considerable material
and environmental harm.
Follow local regulations on dispatching product components
l
for recycling or proper disposal.
In accordance with the Waste Electrical and Electronic Equipment
(WEEE) Directive, the following must be observed during disposal:
This product may not be disposed of in household waste. It
l
must be taken to a collection point for material recovery and
recycling.
General
Observe safety distances.
l
Never deactivate safety installations.
l
Disconnect the power source before installation, conversion,
maintenance, or calibration. Ensure that no residual energy
remains in the system.
Incorrect handling and assembly
Incorrect handling and assembly can make the product unsafe
and can risk the danger of serious injuries and considerable
material damage.
Order all work to be performed only by appropriately qualified
l
personnel.
Observe the relevant accident prevention regulations.
l
Use suitable assembly and transport equipment.
l
Take precautions against pinching and crushing.
l
Falling and ejected components can lead to serious injury or
death.
Observe the specifications in the iTENDO² operating manual.
l
Only use iTENDO² in machines with closed protective
l
equipment.
Do not exceed the permissible speed range of the iTENDO² (see
l
iTENDO² operating manual).
01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510