SCHUNK iTENDO2 easy monitor Assembly And Operating Manual page 27

5.6.3.3 "Alarms" display mode
01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
In the "Alarms" display mode, all alarms that have occurred
recently are displayed.
NOTE: If an alarm occurs, the associated Digital OUT output is
switched for 5 seconds.
The drop-down menu (1) can be used to select and display a
process stored in the Wireless Receiver and its alarms.
To delete an individual alarm, you have to tap the "X" button (2).
To delete all alarms, you have to tap the "Delete all alarms"
button (3).
There are 3 different types of alarms:
Alarm from the Live display when the exact limit is exceeded
l
Alarm from the trend display for the upper exact limit
l
Alarm from the trend display for the lower exact limit
l
For more detailed information on an alarm, tap the
corresponding alarm. Tapping an alarm opens the Trend display
or the Recording display and selects the corresponding recording
of the alarm.
NOTE: The respective trend exact limits can be set in the "Manage
process" area
} 5.6.3.6
[/ 33].
iTENDO² app with easy monitor
27