SCHUNK iTENDO2 easy monitor Assembly And Operating Manual page 21

01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
Connecting the Wireless Receiver
1. Make sure that the Bluetooth connection is enabled on the
iTENDO² tablet
} 5.2
2. Start the iTENDO² app
3. Start the scan process by tapping the "ITN-TH-DEMO" button
(1).
ð A list of sensors and iTENDO² Wireless Receivers to which a
connection is possible appears. NOTE: If the desired
iTENDO² Wireless Receiver does not appear, check the
cable connection of the iTENDO² Wireless Receiver.
4. Tap the desired iTENDO² Wireless Receiver (2).
IMPORTANT! Wireless Receivers have the description "ITN-
EM-...."! If a sensor with the description "ITN-TH-...." is
selected, the pad version of the iTENDO² app will start! This
version has a different range of functions!
ð Connection to the iTENDO² Wireless Receiver is established,
the data appears in the iTENDO² app.
Disconnecting the Wireless Receiver
Tap the selection field with the description of the iTENDO²
l
Wireless Receiver (3).
ð The connection is terminated and a list of sensors and
iTENDO² Wireless Receivers to which a connection is
possible appears.
[/ 15].
[/ 15].
} 5.3
iTENDO² app with easy monitor
21