Subscribe to Our Youtube Channel
Related Manuals for SCHUNK iTENDO2 easy monitor
Summary of Contents for SCHUNK iTENDO2 easy monitor
- Page 1 Assembly and Operating Manual iTENDO² easy monitor ID 1516313 Translation of Original Operating Manual...
- Page 2 Imprint Imprint Copyright: This manual is protected by copyright. The author is SCHUNK GmbH & Co. KG. All rights reserved. Technical changes: We reserve the right to make alterations for the purpose of technical improvement. Document number: 1547510 Version: 01.00 | 05/04/2023 | en...
-
Page 3: Table Of Contents
Table of contents Table of Contents 1 General ..................... 5 About this manual................1.1.1 Presentation of Warning Labels ............. 1.1.2 Definition of Terms ..............1.1.3 Applicable documents ..............1.2 Warranty ................... 1.3 Scope of delivery................. 1.4 Prerequisites ..................2 Basic safety notes ................2.1 Product safety .................. - Page 4 Table of contents 5.6.3 Display modes of the iTENDO² app with easy monitor ......22 6 Troubleshooting................... 38 7 Spare parts list ..................40 8 Disposal ..................... 42 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510...
-
Page 5: General
General 1 General 1.1 About this manual This manual contains important information for a safe and appropriate use of the product. This manual is an integral part of the product and must be kept accessible for the personnel at all times. Before starting work, the personnel must have read and understood this operating manual. -
Page 6: Definition Of Terms
1539948) Documents of the individual components The documents labeled with an asterisk (*) can be downloaded from schunk.com. 1.2 Warranty If the product is used as intended, the warranty is valid for 12 months from the ex-works delivery date under the following... -
Page 7: Basic Safety Notes
Structural changes should only be made with the written approval of SCHUNK. 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510... -
Page 8: Spare Parts
Use of unauthorized spare parts Using unauthorized spare parts can endanger personnel and damage the product or cause it to malfunction. Use only original spare parts or spares authorized by SCHUNK. 2.6 Environmental and operating conditions Required ambient conditions and operating conditions... -
Page 9: Obligations Of The Operator
Basic safety notes 2.8 Obligations of the operator The operator must ensure that: The product is only used as intended. The product is only operated in a perfect and fully functional status. The correct functioning of the product is checked regularly. The operating manual is always kept in a complete and legible condition close to the product. -
Page 10: Notes On Safe Operation
Basic safety notes 2.10 Notes on safe operation Incorrect handling of the personnel Incorrect handling and assembly may impair the product's safety and cause serious injuries and considerable material damage. Avoid any manner of working that may interfere with the function and operational safety of the product. -
Page 11: Malfunctions
For trouble-free, long-lasting use, clean, maintain and check the functionality of the product regularly. Repair work may only be carried out by SCHUNK! If you have any questions regarding maintenance and servicing, our technicalcustomer service is available during our business... -
Page 12: Disposal
Basic safety notes 2.14 Disposal Handling of disposal The incorrect handling of disposal may impair the product's safety and cause serious injuries as well as considerable material and environmental harm. Follow local regulations on dispatching product components for recycling or proper disposal. In accordance with the Waste Electrical and Electronic Equipment (WEEE) Directive, the following must be observed during disposal: This product may not be disposed of in household waste. -
Page 13: Itendo² Easy Monitor
iTENDO² easy monitor 3 iTENDO² easy monitor This product is a software-based system extension of the iTENDO² easy connect system. Therefore, a functioning iTENDO² easy connect system is required for its use. Information on the setup and function of the iTENDO² easy connect system is provided in the product-specific Assembly and Operating Manual (1539948). -
Page 14: Itendo² Connect Box
iTENDO² Connect Box 4 iTENDO² Connect Box The technical data of the iTENDO² Connect Box are noted in the iTENDO² easy connect Assembly and Operating Manual (1539948). This manual also contains all additional connections for iTENDO² easy monitor: Digital IN iTENDO² easy monitor (start recording) Digital OUT iTENDO²... -
Page 15: Itendo² App With Easy Monitor
iTENDO² app with easy monitor 5 iTENDO² app with easy monitor 5.1 Basic information NOTICE Possible transmission errors of the sensor data. Obstacles or electromagnetic interference from the environment can cause transmission errors during the transmission of sensor data. Correct interpretation of the sensor data is the responsibility of the user. -
Page 16: Update From Easy Connect To Easy Monitor
iTENDO² app with easy monitor 5.4 Update from easy connect to easy monitor The software update is carried out using the iTENDO² app on the iTENDO² Wireless Receiver. Start the iTENDO² app. Connect the iTENDO² Wireless Receiver ("ITN-EC-...") with the iTENDO²... -
Page 17: Creating Screenshots
iTENDO² app with easy monitor 5.5 Creating screenshots There are two ways of creating screenshots in the iTENDO² app: Briefly press the On/Off button and the Volume down button simultaneously (1). NOTE: This allows screenshots to also be created outside of the iTENDO² app. ð... -
Page 18: Design And Description Of The Itendo² App With Easy Monitor
iTENDO² app with easy monitor 5.6.1 Design and description of the iTENDO² app with easy monitor Wireless Receiver selection Configuration area Settings Licenses About Live display Trend display Alarm display Recordings Wireless Receiver management Manage process 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510... - Page 19 iTENDO² app with easy monitor Wireless Receiver selection The Wireless Receiver can be selected here. Configuration area Submenu with settings and general data. Settings Allows you to select different languages and change the separators for the data export for iTENDO² pad and iTENDO² easy monitor.
-
Page 20: Connecting/Disconnecting The Itendo² Wireless Receiver
iTENDO² app with easy monitor 5.6.2 Connecting/disconnecting the iTENDO² Wireless Receiver 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510... - Page 21 iTENDO² app with easy monitor Connecting the Wireless Receiver Make sure that the Bluetooth connection is enabled on the iTENDO² tablet [/ 15]. } 5.2 Start the iTENDO² app [/ 15]. } 5.3 Start the scan process by tapping the "ITN-TH-DEMO" button (1). ð A list of sensors and iTENDO² Wireless Receivers to which a connection is possible appears.
-
Page 22: Display Modes Of The Itendo² App With Easy Monitor
iTENDO² app with easy monitor 5.6.3 Display modes of the iTENDO² app with easy monitor There are different display modes that can be selected by tapping the corresponding button. 5.6.3.1 Live display mode In the "Live" display mode, the detected vibration data from the sensor is displayed in the central diagram. - Page 23 iTENDO² app with easy monitor iTENDO² Wireless Receiver selection Allows data to be selected and accessed from the iTENDO² Wireless Receiver connected to the iTENDO² app [/ 20]. } 5.6.2 Connected iTENDO² sensor Display field of the iTENDO² sensor to which the system is connected.
- Page 24 iTENDO² app with easy monitor Reset view Allows the settings of the scale parameters to be reset for the axes and the manual zoom in the live diagram. Settings menu scale parameters of the Y-axis Allows the settings of the scale parameters to be set and reset for the Y-axis of the central diagram.
- Page 25 iTENDO² app with easy monitor 5.6.3.2 "Trend" display mode In the "Trend" display mode, it is possible to determine the average values of individual recordings from the recording controlled via Digital IN (ON). In the central diagram, the average values can be compared and the exact limits defined for the process can be displayed.
- Page 26 iTENDO² app with easy monitor Settings menu scale parameters of the Y-axis Allows the settings of the scale parameters to be set and reset for the Y-axis of the central diagram. Process selection The drop-down menu allows you to select a process stored in the Wireless Receiver project to display its trend history.
- Page 27 iTENDO² app with easy monitor 5.6.3.3 "Alarms" display mode In the "Alarms" display mode, all alarms that have occurred recently are displayed. NOTE: If an alarm occurs, the associated Digital OUT output is switched for 5 seconds. The drop-down menu (1) can be used to select and display a process stored in the Wireless Receiver and its alarms.
- Page 28 iTENDO² app with easy monitor 5.6.3.4 Display mode recordings The "Recordings" display mode lists all manual recordings of processes, as well as all recordings of processes controlled via Digital IN (ON). If required, the different recordings can be displayed as different colored lines in the central diagram. NOTE: A maximum of 10 recordings can be displayed simultaneously.
- Page 29 iTENDO² app with easy monitor Settings menu scale parameters of the Y-axis Allows the settings of the scale parameters to be set and reset for the Y-axis of the central diagram. Camera button Allows screenshots of the central diagram to be taken } 5.5 [/ 17].
- Page 30 iTENDO² app with easy monitor 5.6.3.5 "Export/manage recordings" display mode Exporting recordings In the Recordings display mode, data can be exported in CSV file format. To do this proceed as follows. NOTE: The decimal separator in the CSV file can be changed in the settings (point or comma) } 5.6.1 [/ 18].
- Page 31 iTENDO² app with easy monitor Finding exported recordings To access the exported data open the "My Files" button. Current files Search Documents Downloads Current files Under "Current files" you can see the last saved files. Search Under "Search" files can be searched for by their file name. Documents An overview of all folders appears under "Documents".
- Page 32 iTENDO² app with easy monitor Managing exported recordings Open the appropriate folder with the desired file. Tap and hold the file with your finger for a few seconds. ð A selection bar (a) opens in which the file can be released (b) or, for example, renamed (c).
- Page 33 iTENDO² app with easy monitor 5.6.3.6 "Wireless Receiver management" display mode In the "Wireless Receiver management" display mode, iTENDO² sensors and processes can be assigned to a memory bank. 64 memory banks are available for this purpose. Selection area sensors nearby Selection area other known sensors Description of the sensor in memory bank Description of the process in memory bank...
- Page 34 iTENDO² app with easy monitor Selection area sensors nearby Sensors that are within the connection range are displayed here. Selection area other known sensors Sensors that are currently not within the connection range are displayed here. Description of the sensor in memory bank The description of the sensor stored in the memory bank is displayed here.
- Page 35 iTENDO² app with easy monitor Values table memory banks Values table of the necessary activation of the digital IN inputs at the iTENDO² Connect Box for the different memory banks. To store a sensor and a process in a memory bank, proceed as follows: Unlock "Memory banks management"...
- Page 36 iTENDO² app with easy monitor 5.6.3.7 Manage process display mode In the "Manage process" display mode, the settings of the process can be managed and new processes can be added. NOTE: Processes must be created before they can be managed. Only processes can be added to the iTENDO²...
- Page 37 iTENDO² app with easy monitor Process settings In this area the selected process can be renamed, commented on or deleted. Change the process name or write a comment (a). NOTE: A process name is always required. Area for setting the alarm from the "Live" display mode (b). Area for setting the alarms from the "Trend"...
-
Page 38: Troubleshooting
Troubleshooting 6 Troubleshooting Repair work may only be carried out by SCHUNK! If you have any questions regarding maintenance and servicing, our technicalcustomer service is available during our business hours: Service telephone: +49-7133-103-2956 service.toolholder@de.schunk.com NOTE: All other errors are described in the Assembly and Operating Manual for iTENDO²... - Page 39 Troubleshooting Possible malfunction / Possible causes Remedial measures occurring errors Observe alarm times. See ePlan in the appendix. Output is only being switched TIP: To trigger a permanent for 5 seconds signal, the customer can use self-locking functions or circuits. Alarm is not being issued Parameters of the alarm limits Check the values of the...
-
Page 40: Spare Parts List
Spare parts list 7 Spare parts list Designation 1484494 iTENDO² easy connect package with iTENDO² Connect Box iTENDO² Wireless Receiver cable iTENDO² Wireless Receiver iTENDO² pad complete system 1484688 iTENDO² easy connect upgrade with iTENDO² Connect Box iTENDO² Wireless Receiver cable iTENDO²... - Page 41 Spare parts list Designation 1532110 iTENDO² Wireless Receiver, magnetic 1484493 iTENDO² pad complete system with iTENDO² case iTENDO² tablet including iTENDO² app iTENDO² charger iTENDO² tablet charger iTENDO² power plug 1484677 iTENDO² tablet with iTENDO² app installed 1484683 iTENDO² charger 1484679 iTENDO²...
-
Page 42: Disposal
It must be taken to a collection point for material recovery and recycling. Follow local regulations on dispatching product components for recycling or proper disposal. Alternatively, you can return the product to SCHUNK for correct disposal. 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510... - Page 43 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510...
- Page 44 SCHUNK GmbH & Co. KG Spann- und Greiftechnik Bahnhofstr. 106 – 134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 Fax +49-7133-103-2399 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the iTENDO2 easy monitor and is the answer not in the manual?
Questions and answers