Control Setting - HOMCOM 823-028V70 Assembly Instructions Manual

III. Control Setting
1.Control panel operation instructions
1 ） operation interface ：
Power Key 2. Up key
1.
6. Cool Key 7. Dehumidifier Key
10. High Fan Speed Key
When the machine is powered on for the first time, the buzzer will play power sound, and
then the machine will get into standby status.
1: Power Key: press the key to turn on and turn off the machine. In the case of power
on, press the key to turn off the machine; in the case of power off, press the key to turn
on the machine.
2: Mode Selection Key: In the case of power on, press the key to switch between
cooling → dehumidifying →fan → cooling mode.
3: Fan Speed Selection Key:
In cooling mode, press the key to select high or low wind speed operation.
In fan mode, press the key to select high or low wind speed operation.
In dehumidifying mode, pressing the key is invalid, and the fan will forcibly choose low
wind speed operation.
4: Up Key and Down Key: press the two keys to change the setting temperature or
setting time, operate as follows:
While setting temperature, press up key or down key to select the required temperature
(not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
5: Sleep Mode:
In the cooling Mode, Press the SLEEP Key to turn on the sleep mode,then the unit will
work on Energy-Saving and quiet type.
6: Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press the
key to open timing.
Press the key, when the timing symbol flashes, press UP and DOWN key to select the
required timing value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by
one hour.
6
5
4
3
3. Time key 4. Water Full key
8. Fan Key
11. Sleep Key 12. Down Key
7
8
7
13
11
2 12
1
5. Swing key
9. Low Fan Speed Key
13. LED display Key
9
10