Control Setting - HOMCOM A020G Instruction Manual

III. Control Setting
I. Operation interface:
1: Power Key
5: Display Window
9: Swing Key
1. Power Key: Press this key to turn on and turn off the unit.
2. Mode Key: In the case of power on, press this key to switch between cooling →
dehumidifying → fan mode.
Press the key, when the timing symbol flashes, press up and down key to select the
required timing value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by
one hour.
3. FAN SPEED Key: In cooling, fan and dehumidifying mode, press this key to select
high, middle, low speed. This function is not available in SLEEP mode and
DEHUMIDIFYING mode.
4. DOWN Key: Under timer mode, press this key can be adjusted downward the time.
Under cooling mode, press this key can be adjusted downward the temperature.
Press this button to decrease the temperature setting or set down the timer to the
required timer setting. This function is not available under FAN mode and
DEHUMIDIFYING mode.
5. Display Window
6. UP Key: Press this button to increase the temperature setting or set up the timer to the
required timer setting. This function is not available under FAN mode and
DEHUMIDIFYING mode.
7. TIMER Key: In the case of power on, press the key to close timing; in the case of power
off, press the key to open timing.
8. Sleep Mode: When the power is on and In the cooling mode, press 'SLEEP' button to
start the sleep mode. Under sleep mode, the FAN speed is set to LOW speed and not
adjustable. The SLEEP mode can be cancelled by pressing the button.
9. SWING Key: The SWING function only can work after turn on the unit, but you can turn
on or off.
2: Mode Key
6: Up Key
10: WIFI Indicator
6
3:Fan Key 4:Down Key
7: Timer Key 8: Sleep Mode Key