Operating The Refrigerator - ECG ERB 21880 NXA++ Instruction Manual

Display and control panel
External display/control
GB

OPERATING THE REFRIGERATOR

Setting the storage temperature in the fresh food compartment
When switched on for the fi rst time, all LEDs on the display will light up for 3 seconds, then only the LED
indicating the set cooling level will remain lit.
Display indication
In the event of a breakdown, the failure code is repeatedly indicated on the display by the corresponding LED.
During normal trouble free operation, the lit LED indicates the set cooling temperature.
Cooling temperature setting
Each time you press the cooling level button, the setting changes cyclically to the next level. The refrigerator
starts to cool to the set temperature 15 seconds after the setting is done.
Level 1
Quick cooling function
Set the quick cooling mode.
The quick cooling Indicator lights up and cools the refrigerator to 2°C. After 150 minutes, the quick cooling
function automatically turns off . You can turn off the quick cooling function earlier by setting a diff erent
cooling temperature.
Freezer temperature control
During normal operation we recommend to set the cooling in the freezer to
NORMAL. In the COLD position the temperature is unnecessarily low, but in the
COLDER setting the cooling may not be suffi cient.
At summer temperatures, if the room temperature reaches 35 ° C or more, set
the controller to COLD.
56
°C
8
Level 5
6
Level 4
4
Level 3
3
Level 2
2
Level 1
Super
Quick cooling
Cooling temperature setting button
Total No Frost
Level 2 Level 2 Level 4 Level 5