Table of Contents
Advertisement
Available languages
Available languages
•
When your refrigerator is placed near the freezer, there must be a distance of at least 2 cm between them
to prevent the formation of moisture on the outside surface.
•
Do not place anything on the refrigerator and place it in a suitable location so that a minimum of 30 cm is
left above the top. When installing, make sure that there is a 10 cm clearance from each side and from rear.
•
The adjustable front feet must be adjusted to a suitable height so that the freezer can operate stably and
correctly. You can adjust the feet by turning them clockwise (or in the opposite direction). This must be
done before placing food in the refrigerator.
•
Before using the freezer, wipe all internal surfaces and drawers with a cloth dipped in warm water with
a spoon of baking soda and then rinse with clean water and dry. Replace all parts after cleaning.
•
Install the plastic spacer (part with black blades in the back) by 90° rotation as shown to prevent touching
the condenser touching the wall.
•
The refrigerator must be positioned so that the free space does not exceed 75 mm.
Changing the door opening side
1) Remove the hinge cover.
2) Unscrew the top hingeplate.
3) Remove the top refrigerator door.
4) Use a screwdriver to unscrew the middle
hingeplate.
GB
53
Advertisement
Table of Contents
