Telephone operation
Join a call in progress
You can use up to four system handsets at a time on an outside call. You can
buy additional expansion handsets (CS6409) for this telephone base. You can
register up to five handsets to the telephone base.
To join a call:
•
When a handset is on a call, press
Press OFF/
•
CANCEL
Find handset
Use this feature to find all system handsets.
To start the paging tone:
Press /FIND HANDSET on the telephone base once
•
and then release when the telephone is not in use. All idle
handsets ring and their screens show ** PAGING**.
To end the paging tone:
Press /FIND HANDSET on the telephone base once and
•
then release.
/FLASH,
•
Press
•
Place the handset in the telephone base or charger.
Do not press and hold /FIND HANDSET for more than four seconds. It may
Do not press and hold /FIND HANDSET for more than four seconds. It may
•
•
lead to handset deregistration. If 1.PRESS FIND HS ON BASE 4 SEC and
lead to handset deregistration. If 1.PRESS FIND HS ON BASE 4 SEC and
2.THEN PRESS # ON HANDSET display alternately on the handset, refer to
2.THEN PRESS # ON HANDSET display alternately on the handset, refer to
Troubleshooting to register the handset to the telephone base.
Troubleshooting to register the handset to the telephone base.
When you press OFF/
When you press OFF/
•
•
that handset is silenced but the paging tone continues on other handsets.
that handset is silenced but the paging tone continues on other handsets.
•
•
You cannot use the find handset feature while the telephone base is playing
You cannot use the find handset feature while the telephone base is playing
messages or the answering system is being accessed remotely.
messages or the answering system is being accessed remotely.
to exit the call. The call continues until all handsets hang up.
or any dialing key (0-9,
or MUTE/
or MUTE/
CANCEL
CANCEL
/
or
on another handset.
FLASH
or #) on the handset.
TONE
on a handset, the ringer of
on a handset, the ringer of
DELETE
DELETE
22