Table of Contents
Advertisement
Temporary tone dialing
If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This is
useful if you need to send touch-tone
signals to access your telephone banking
or long distance services.
1. During a call, press
.
2. Use the dialing keys to enter the
number you wish to dial.
3. The telephone sends touch-tone
signals. The telephone automatically
returns to pulse dialing mode after
you end the call.
Telephone Operations
Handset control key panel:
10
Make a call
1. Press
or
on the handset.
2. When you hear a dial tone, dial the
number.
• The handset displays Unable to call
if the telephone line is in use.
NOTES
• The handset shows the elapsed time as you
talk (in hours, minutes and seconds).
• While entering numbers, press and hold
PAUSE to insert a dialing pause
(a p appears).
Predial a call
1. Enter the telephone number.
2. Press
or
to dial.
NOTES
• The handset displays Unable to call if the
telephone line is in use.
• The handset shows the elapsed time as you
talk (in hours, minutes and seconds).
• While entering numbers, press DELETE or
CANCEL to make corrections;
press and hold PAUSE to insert a dialing
pause (a p appears).
Answer a call
Press
,
, or any dialing key (0-9,
, or
) to answer.
End a call
Press OFF on the handset, or place the
handset in the telephone base or
handset charger.
Speakerphone
When the handset is on a call, press
switch between the speakerphone
and the handset earpiece. When the
speakerphone is active, the handset
displays Speaker.
Volume control
During a call, press
/VOLUME/
NOTES
• The handset and speakerphone volume
settings are independent.
• When the volume reaches the minimum or
maximum setting, you hear two beeps.
Mute
The mute function allows you to hear the
other party but the other party cannot
hear you.
• During a call, press MUTE. The handset
displays Muted until the mute function
is turned off.
• Press MUTE again to resume the
conversation. The handset briefly
displays Microphone on.
Join a call in progress (for multiple
handset models only)
Another handset can join you on a home
call. That call continues until all parties
hang up. You can share an outside call
with up to four handsets at the same time.
To join a call:
• When a handset is already on a call,
press
or
on another handset to
join the call.
• Press OFF or place the handset in the
telephone base or handset charger to
exit the call. The call continues on the
other handset until both handsets hang
up.
to
11
.
Advertisement
Table of Contents
