Setting Of The Operation Pattern; Running Speed Region - Mitsubishi Electric MELIPM Series Instruction Manual

8.5 Setting of the Operation Pattern

8.5.1 Running speed region

Pr. 1 "maximum speed"
Pr. 2 "minimum speed"
Pr. Setting Range
1 0 to 7200
2 0 to 7200
Motor speed
Pr.1
Pr.2
Unit
If the speed command entered is more than the maximum
r/min speed set in Pr. 1, the running speed is clamped at the
maximum speed.
If the speed command entered is less than the minimum
speed set in Pr. 2, the running speed will not fall below the
r/min minimum speed.
If the speed command is not input, turning "ON" the start
signal will start operation at the minimum speed.
0
Get other manuals https://www.bkmanuals.com
8 PARAMETER FUNCTIONS
Operation
Speed command value
5,10V
8-6