To Install The Modbus Adapter Pcb With Field Supplied Casing; Connecting The Electrical Wiring - Daikin EKMBPP1 Installation Manual

▪ The cable glands on top of the box.
▪ X1A connector to the left.
▪ X7M connector below the cable glands.
▪ X2M connector to the right.
7 Provide wire strain relief.
▪ Inside the box: Tighten the cable glands. Leave enough cable slack
inside the installation box before tightening.
8 Close the box with the screw provided in the KRP1BC101 kit.
9 Follow the installation instructions of the KRP1BC101 installation box.
Make sure the box is mounted onto the indoor unit for earthing as
described in the KRP1BC101 manual.
5.3.2 To install the Modbus adapter PCB with field
supplied casing
In case of field supplied casing, EKMBPP1 MUST be installed using:
▪ A double insulated plastic box, or
▪ A metal box which is earthed properly to be compliant to the
applicable electrical safety norm.
DANGER: RISK OF ELECTROCUTION
Connect the earth wires correctly. Possible consequence:
electrocution.
5.4

Connecting the electrical wiring

DANGER: RISK OF ELECTROCUTION
Do NOT connect or turn on power supply before you have
mounted the adapter, connected the electrical wiring and have
closed the adapter.
EKMBPP1
Modbus adapter
4P720139-1B – 2023.09
5 Installation
Installation manual
13