Table of Contents
Advertisement
Connecting Wired Remote
Control
You can operate the functions of this unit with a
wired remote control.
Memo :
When the switches of the camera recorder and
0
remote control unit are operated at the same
time, the switch operation of the remote control
unit takes priority over that of the camera
recorder.
1 Connect a wired remote control to the
camera recorder.
Connect the wired remote control (sold
separately) to the [REMOTE] terminal of this
camera recorder.
REMOTE
.
Caution :
Turn off the power of the camera recorder when
0
connecting a wired remote control.
2 Turn on the power of the camera recorder.
Loading Clips to the PC
Memo :
1 Connect the camera recorder to the PC
Connect the wired
remote control
.
You can load clips to a PC by connecting the
0
camera recorder to the PC via the USB port.
Doing so enables clips stored in the SD card to
be managed and edited on the PC.
Files on the SD card can be managed/edited on
0
the connected PC in this mode only for USB
mass storage class devices that are recognized
by the said PC as a peripheral drive.
Files cannot be written to the SD card.
0
using a USB cable.
A confirmation message "Change to USB
Mode?" to enable the USB connection appears.
Connecting Wired Remote Control
PC
129
Advertisement
Table of Contents
