Playing Back - JVC GY-HM190AG Instructions Manual

Memo :
The object of action is the clip of the current slot
0
being displayed.
[Selected Clips] cannot be performed if there are
0
no selected (appended with check mark) clips.
[This Clip] cannot be performed if there are more
0
than one selected (appended with check mark)
clips.
If the write-protect switch of an SD card is set,
0
OK mark cannot be appended or deleted, and
the clips cannot be deleted and trimmed.
80
Playing Recorded Clips

Playing back

Use the operation buttons on the side control panel
of the camera recorder to play back.
A
B
C
.
A Set Button (R)
Plays back/pauses the clip pointed by the
0
cursor.
You can press the cross-shaped button (HI)
0
to perform frame-by-frame forward playback
during pause mode.
B Cross-shaped Button (JKH I)
[J/K] Button:
0
Skips in the reverse or forward direction.
[H/I] Button:
0
During Playback:
0
Fast forwards in the reverse or forward
direction.
While paused:
0
Frame-by-frame playback in the reverse
or forward direction.
C [CANCEL/STOP] Cancel/Stop Button
Stops playback.
1 In the thumbnail screen, move the cursor to
the clip to be played back.
Move the cursor to the clip to be played back
using the cross-shaped button (JKH I).
2 Press the Set button (R).
Playback of the selected clip starts.
Audio Output during Playback
You can confirm the playback sound from the
0
monitor speaker, or the headphone connected
to the [x] terminal. When a headphone is
connected to the [x] terminal, sound cannot be
output from the monitor speaker.
(A P128 [Connecting the Headphone] )
Adjust the volume of the monitor speaker and
0
headphone using the J / K volume buttons on
the side of the camera recorder.