National Instruments NI PXI-8109 User Manual page 65

Chapter 4 Common Configuration Questions
1
1 Default Position
NI PXI-8109 User Manual
What is the purpose of the W1 jumper on the NI PXI-8109?
2
Figure 4-3. The W1 Jumper on an NI PXI-8109 Controller
The W1 jumper enables reserved features for National Instruments factory
testing only. The W1 jumper is not needed for normal operation, and the
shunt should be left in the default position (with the shunt on pins 1 and 2,
or with the shunt removed entirely). If the shunt is in the wrong position,
the BIOS will display a warning message.
Where do I get the latest software drivers?
The latest National Instruments software is available from
. For peripheral drivers, refer to KnowledgeBase 3H3COSD8,
downloads
What Peripheral Drivers Should I Use with My PXI or VXI Controller?,
at .
ni.com
2 Reserved
4-6
ni.com/
ni.com