National Instruments NI PXIe-8130 User Manual
  1. Manuals
  2. Brands
  3. National Instruments Manuals
  4. Computer Hardware
  5. NI PXIe-8130
  6. User manual

National Instruments NI PXIe-8130 User Manual

Hide thumbs Also See for NI PXIe-8130:
Table of Contents

Advertisement

Quick Links

Download this manual
PXI-8221

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NI PXIe-8130 and is the answer not in the manual?

Questions and answers

Related Manuals for National Instruments NI PXIe-8130

Summary of Contents for National Instruments NI PXIe-8130

  • Page 1 PXI-8221...
  • Page 2 PXI Express NI PXIe-8130 User Manual NI PXIe-8130 User Manual March 2010 372177E-01...
  • Page 3 Thailand 662 278 6777, Turkey 90 212 279 3031, United Kingdom 44 (0) 1635 523545 For further support information, refer to the Technical Support and Professional Services appendix. To comment on National Instruments documentation, refer to the National Instruments Web site at and enter ni.com/info the info code feedback ©...
  • Page 4 Warranty The NI PXIe-8130 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period.
  • Page 5 Operation of this hardware in a residential area is likely to cause harmful interference. Users are required to correct the interference at their own expense or cease operation of the hardware. Changes or modifications not expressly approved by National Instruments could void the user’s right to operate the hardware under the local regulatory rules.

  • Page 6: Table Of Contents

    Chapter 1 Introduction Benefits of PXI Express....................1-1 NI PXIe-8130.........................1-2 Description ......................1-2 Functional Overview ..................1-3 NI PXIe-8130 Functional Description ..........1-3 National Instruments Software ..................1-5 Cleaning .........................1-7 Chapter 2 Installation and Configuration Installing the NI PXIe-8130...................2-1 How to Remove the Controller from the PXI Express Chassis.......2-4 BIOS Setup Utility......................2-4...
  • Page 7 Front Panel Features ...................... 3-16 Data Storage ........................3-16 Chapter 4 Common Configuration Questions General Questions ......................4-1 Boot Options........................4-2 Cables and Connections ....................4-3 Software Driver Installation ..................4-3 Upgrade Information ..................... 4-4 PXI Express Configuration.................... 4-6 NI PXIe-8130 User Manual ni.com...
  • Page 8 Contents Chapter 5 Troubleshooting Appendix A Specifications Appendix B Technical Support and Professional Services Glossary Index © National Instruments Corporation NI PXIe-8130 User Manual...

  • Page 9: About This Manual

    National Instruments PXIe-8130 embedded computer kit. How to Use the Documentation Set Begin by reading the NI PXIe-8130 Installation Guide, a brief quick-start guide that describes how to install and get started with your controller. This manual, the NI PXIe-8130 User Manual, contains more details about changing the installation or configuration from the defaults and using the hardware.

  • Page 10: Related Documentation

    PXI-5 PXI Express Hardware Specification, Revision 1.0, PXI Systems Alliance • PXI-6 PXI Express Software Specification, Revision 1.0, PXI Systems Alliance • Serialized IRQ Support for PCI Systems Specification, Revision 6.0, Compaq Computer et al. • ExpressCard Standard, Release 1.0, PCMCIA NI PXIe-8130 User Manual ni.com...

  • Page 11: Introduction

    Introduction This chapter provides overview information for PXI Express and the NI PXIe-8130 embedded controller. Benefits of PXI Express The PXI (PCI eXtensions for Instrumentation) industry standard, an open specification governed by the PXI Systems Alliance (PXISA), has quickly gained adoption and grown in prevalence in test, measurement, and control systems since its release in 1998.

  • Page 12: Ni Pxie-8130

    USB 2.0 ports, a PCI-based GPIB controller, Gigabit Ethernet, a reset button, and a PXI trigger. The NI PXIe-8130 has an AMD 2.3 GHz Turion 64 X2, 800 MHz HyperTransport Link, Dual Channel DDR2, 667 MHz memory controller, all the standard I/O, and a 40 GB (or larger) hard drive.

  • Page 13: Functional Overview

    NI PXIe-8130 embedded computer. NI PXIe-8130 Functional Description The NI PXIe-8130 is a modular PC in a PXI Express 3U-size form factor. Figure 1-1 is a functional block diagram of the NI PXIe-8130. Following the diagram is a description of each logic block shown.
  • Page 14 Chapter 1 Introduction The NI PXIe-8130 consists of the following logic blocks on the CPU module and the I/O (daughter card) module. The CPU module has the following logic blocks: • Socket S1 CPU is the socket definition for the AMD 2.3 GHz Turion 64 X2 processor.

  • Page 15: National Instruments Software

    I/O Board Figure 1-2. NI PXIe-8130 CPU Board and I/O Board National Instruments Software National Instruments has developed several software tools you can use with the NI PXIe-8130. National Instruments’ hardware and software work together to help you make the most of your PXI Express system. The LabVIEW, Measurement ™...
  • Page 16 RTSI or PXI synchronization, self-calibration, messaging, and acquiring data to extended memory. For more information visit ni.com/daq National Instruments’ Modular Instruments use specialized drivers suited to each product’s specialization. Express VIs provide customized, interactive programming of instruments in a single interface and soft front panels provide an interface for testing the functionality of each instrument with no programming required.

  • Page 17: Cleaning

    NI-VISA driver for Linux and NI Modular Instruments are partially supported. For more information visit ni.com/linux Cleaning Use a dry, low-velocity stream of air to clean the NI PXIe-8130 controller. If needed, use a soft-bristle brush for cleaning around components. © National Instruments Corporation NI PXIe-8130 User Manual...

  • Page 18: Installation And Configuration

    NI PXIe-8130 controller. Installing the NI PXIe-8130 This section contains general installation instructions for the NI PXIe-8130. Consult your PXI Express chassis user manual for specific instructions and warnings. Plug in your chassis before installing the NI PXIe-8130. The power cord grounds the chassis and protects it from electrical damage while you install the module.
  • Page 19 1 Protective Screw Cap (4X) Figure 2-1. Removing Protective Screw Caps Make sure the injector/ejector handle is in its downward position. Align the NI PXIe-8130 with the card guides on the top and bottom of the system controller slot. Caution Do not raise the injector/ejector handle as you insert the NI PXIe-8130.
  • Page 20 Chapter 5, What if the NI PXIe-8130 does not boot? Troubleshooting. Figure 2-2 shows an NI PXIe-8130 installed in the system controller slot of a National Instruments NI PXIe-1062Q chassis. 1 NI PXIe-1062Q Chassis 3 Injector/Ejector Rail 2 NI PXIe-8130 Controller Figure 2-2.

  • Page 21: How To Remove The Controller From The Pxi Express Chassis

    If the PXIe chassis Inhibit Mode Selector Switch is not in the Default position, any attempt to shut down the NI PXIe-8130 through the push button reset or using Windows will result in the controller Power OK LED blinking. The user will be required to use the Remote Inhibit pin on the Remote Inhibit and Voltage Monitoring Connector to turn off the chassis.

  • Page 22: Main Setup Menu

    System Date—This setting controls the date, which is stored in a battery-backed real-time clock. Most operating systems also include a way to change this setting. Use <+> and <–> in conjunction with <Enter> and <Tab> to change these values. © National Instruments Corporation NI PXIe-8130 User Manual...

  • Page 23: Advanced Setup Menu

    Power/Reset Configuration submenu. Refer to the Power/Reset Configuration Submenu section for more information. • Trigger Router Configuration—Use this setting to access the Trigger Router Configuration submenu. Refer to the Trigger Router Configuration Submenu section for more information. NI PXIe-8130 User Manual ni.com...

  • Page 24: Ide Configuration Submenu

    If no Serial-ATA device is detected on the SATA0 secondary channel, this setting will indicate Not Detected. If a hard disk drive is detected on the interface, the setting will indicate Hard Disk. © National Instruments Corporation NI PXIe-8130 User Manual...

  • Page 25: Primary Ide Master/Slave Submenus

    SMART capable, and if so, to enable the feature. • 32Bit Data Transfer—This setting specifies whether or not 32-bit data transfers are enabled on supported hard disks. The default is Enabled. NI PXIe-8130 User Manual ni.com...

  • Page 26: Serial-Ata 0 Primary/Secondary Channel Submenus

    SMART capable, and if so, to enable the feature. • 32Bit Data Transfer—This setting specifies whether or not 32-bit data transfers are enabled on supported hard disks. The default is Enabled. © National Instruments Corporation NI PXIe-8130 User Manual...

  • Page 27: Serial/Parallel Port Configuration Submenu

    DOS. The default is Enabled. Note Certain real-time applications may require you to disable this setting to reduce loop time jitter. When the controller is configured to boot LabVIEW RT, legacy USB support is automatically disabled. NI PXIe-8130 User Manual 2-10 ni.com...

  • Page 28: Event Log Configuration Submenu

    Mark All Events as Read—Use this option to mark all events in the system event log as read. • Clear Event Log—Use this option to discard all events in the system event log. © National Instruments Corporation 2-11 NI PXIe-8130 User Manual...

  • Page 29: Video Configuration Submenu

    Route Front Panel Trigger—This setting specifies how the front panel SMB trigger should be routed. The front panel trigger can be routed to System Reset, allowing an external trigger to reset the system. The default is Disabled. NI PXIe-8130 User Manual 2-12 ni.com...

  • Page 30: Boot Setup Menu

    If this setting is Disabled, the BIOS will not pause to allow the user to acknowledge an error during the boot process. The default is Enabled. © National Instruments Corporation 2-13 NI PXIe-8130 User Manual...

  • Page 31: Pxi Express Setup Menu

    OS such as Windows XP. The default is Use Switch Setting. Note Booting LabVIEW RT requires that your NI PXIe-8130 controller has an IDE (PATA) hard drive. Such a controller may be ordered from National Instruments with the part number 780032-33. •...

  • Page 32: Security Setup Menu

    The Exit setup menu includes all available options for exiting, saving, and loading the BIOS default configuration. As an alternative to this screen, press <F9> to load optimal BIOS default settings and <F10> to save changes and exit setup. © National Instruments Corporation 2-15 NI PXIe-8130 User Manual...

  • Page 33: System Cmos

    The <F9> key can also be used to select this option. System CMOS The NI PXIe-8130 contains memory backed up by a battery to store BIOS configuration information. Complete the following steps to clear the CMOS contents: Power off the chassis.

  • Page 34: Labview Rt Installation

    The following section describes the necessary steps to get your PXI embedded controller setup to run LabVIEW Real-Time. In this section you will configure the boot mode of the controller, verify or change IP settings, and install LabVIEW Real-Time software. © National Instruments Corporation 2-17 NI PXIe-8130 User Manual...
  • Page 35 Click Yes to automatically reboot the RT target. You may also reboot the controller by right-clicking on the target name under Remote Systems and selecting Reboot. NI PXIe-8130 User Manual 2-18 ni.com...
  • Page 36 LabVIEW Real-Time. Note Refer to the RT Getting Started Guide available on your host computer for more information about setting up your RT target. © National Instruments Corporation 2-19 NI PXIe-8130 User Manual...

  • Page 37: Labview Rt Configuration Switches

    Note You must reboot the controller for any changes to take place. The NI PXIe-8130 controller includes the following LabVIEW RT configuration switches: • Switch 1—Boot LabVIEW RT: Set this switch to ON to boot LabVIEW RT.

  • Page 38: Drivers And Software

    The directory structure under the directory is logically organized images into several levels. In the directory, you will find a directory, an images manuals directory, and a directory. drivers © National Instruments Corporation 2-21 NI PXIe-8130 User Manual...

  • Page 39: Pxi Express Features

    PXI Express Features PXI Express Trigger Connectivity The SMB connector on the NI PXIe-8130 front panel can connect to or from any PXI backplane trigger line. A trigger allocation process is needed to prevent two resources from connecting to the same trigger line, resulting in the trigger being double-driven and possibly damaging the hardware.

  • Page 40: Pxi System Configuration

    To assist system integrators, PXI chassis and system module manufacturers must document their products’ capabilities. PXI Express devices must provide a driver and/or file for .ini identification. For NI PXI Express chassis and controllers, these files are © National Instruments Corporation 2-23 NI PXIe-8130 User Manual...

  • Page 41: Upgrading Ram

    PXI specification at www.pxisa.org Upgrading RAM You can change the amount of installed RAM on the NI PXIe-8130 by upgrading the SO-DIMMs. To upgrade the RAM, remove the NI PXIe-8130 from the PXI Express chassis. To optimize both memory capacity and system performance, use the same size and speed memory module in each of the two module slots.

  • Page 42: Hard Drive Recovery

    Installation and Configuration 1 DDR2 SO-DIMM Module 2 DDR2 SO-DIMM Socket Figure 2-7. Installing a DDR2 SO-DIMM in an NI PXIe-8130 Controller Hard Drive Recovery NI PXIe-8130 controllers include two methods of restoring the original factory condition of your hard drive. Hard drive-based recovery stores a factory backup on a separate portion of your hard drive allowing you to restore your controller without additional media.

  • Page 43: Installing An Os

    OS. When doing so, consider the following guidelines. Installing from a USB CD/DVD-ROM The NI PXIe-8130 supports the installation of Windows 7, XP, or Vista from a USB CD-ROM. However, many other operating systems do not support installation from a USB CD/DVD-ROM. For example, Windows 2000 aborts during the install process because it does not have drivers for the USB CD/DVD-ROM device.

  • Page 44: Expresscard

    Slide the card out of the slot. Caution To avoid data loss and other potential issues, stop communication with your ExpressCard device before removing it from the NI PXIe-8130. In Windows, use the Safely Remove Hardware tool to safely stop the ExpressCard. © National Instruments Corporation...

  • Page 45: I/O Information

    I/O Information Front Panel Connectors Table 3-1 lists various peripherals and their corresponding NI PXIe-8130 external connectors, bus interfaces, and functions. Table 3-1. NI PXIe-8130 Peripherals Overview Peripheral External Connector Description Video DVI-I ATI Radeon X300 Embedded (24-pin DSUB) Serial...

  • Page 46: Front Panel

    3.341 in. [84.85 mm] 2.988 in. [75.91 mm] 2.063 in. [52.4 mm] 1.715 in. [43.56 mm] 1.514 in. [38.47 mm] 1.069 in. [27.15 mm] .000 in. [0 mm] Figure 3-1. NI PXIe-8130 Front Panel Layout and Dimensions NI PXIe-8130 User Manual ni.com...

  • Page 47: Dvi-I

    I/O Information DVI-I Figure 3-2 shows the location and pinouts for the DVI connector on the NI PXIe-8130. Table 3-2 lists and describes the DVI connector signals. 1 9 17 Figure 3-2. DVI Connector Location and Pinout Table 3-2. DVI-I Connector Signals Signal Name TMDS Data2–...
  • Page 48 Hot Plug Detect TMDS Data0– TMDSData0+ TMDS Data0/5 Shield Reserved Reserved TMDS Clock Shield TMDS Clock + TMDS Clock – Analog Red Analog Green Analog Blue Analog Horizontal Sync Analog GND Return: (analog R, G, B) NI PXIe-8130 User Manual ni.com...

  • Page 49: Com1

    I/O Information COM1 Figure 3-3 shows the location and pinouts for the COM1 connector on the NI PXIe-8130. Table 3-3 lists and describes the COM1 connector signal. AMP manufactures a serial port mating connector, part number 745491-5. COM1 Figure 3-3. COM1 Connector Location and Pinout Table 3-3.

  • Page 50: Ethernet

    I/O Information Ethernet Figure 3-4 shows the location and pinouts for the Ethernet connector on the NI PXIe-8130. Table 3-4 lists and describes the Ethernet connector signals. AMP manufactures a mating connector, part number 554739-1. Ethernet Figure 3-4. Ethernet Connector Location and Pinout Table 3-4.
  • Page 51 The controller is communicating with another computer on the LAN. (None) 10 Mbit/sec data rate is selected. Bottom Green 100 Mbit/sec data rate is selected. Amber 1000 Mbit/sec data rate is selected. © National Instruments Corporation NI PXIe-8130 User Manual...

  • Page 52: Parallel Port

    I/O Information Parallel Port Figure 3-5 shows the location and pinouts for the IEEE 1284 (parallel) connector on the NI PXIe-8130. Table 3-6 lists and describes the IEEE 1284 connector signals. Parallel port adapter cables are available from National Instruments, part number 777169-01.
  • Page 53 Data Bit 6 Data Bit 7 INIT# Initialize Printer STROBE# Strobe SLCTIN# Select Input AUTOFD# Auto Line Feed +5 V 19–35 Ground Not Connected Note: The pound symbol (#) indicates an active low signal. © National Instruments Corporation NI PXIe-8130 User Manual...

  • Page 54: Universal Serial Bus

    Universal Serial Bus Figure 3-6 shows the location and pinouts for the Universal Serial Bus (USB) connector on the NI PXIe-8130. Each controller has 4 USB ports on the front panel. Table 3-7 lists and describes the USB connector signals.

  • Page 55: Trigger

    The TRIG connector is the software-controlled trigger connection for routing PXI triggers to or from the backplane trigger bus. Figure 3-7 shows the TRIG connector location on the NI PXIe-8130. Table 3-8 lists and describes the trigger connector signals. Figure 3-7. TRIG Connector Location and Pinout Table 3-8.

  • Page 56: Gpib (Ieee 488.2)

    Chapter 3 I/O Information GPIB (IEEE 488.2) Figure 3-8 shows the location and pinouts for the GPIB connector on the NI PXIe-8130. Table 3-9 lists and describes the GPIB connector signals. ITT Canon manufactures a GPIB mating connector, part number MDSM-25SC-Z11-V51.
  • Page 57 Data Bit 5 DIO6# Data Bit 6 DIO7# Data Bit 7 DIO8# Data Bit 8 REN# Remote Enable 18–25 Logic Ground Note: The pound symbol (#) indicates an active low signal. © National Instruments Corporation 3-13 NI PXIe-8130 User Manual...

  • Page 58: Expresscard/34 Slot

    Chapter 3 I/O Information ExpressCard/34 Slot The NI PXIe-8130 controller is equipped with an ExpressCard/34 slot on the front panel, which provides I/O expansion and options for removable storage. Figure 3-9 shows the location and pinouts for the ExpressCard/34 slot on the NI PXIe-8130.
  • Page 59 PE Data Receive – PERp0 PE Data Receive + Ground PETn0 PE Data Transmit – PETp0 PE Data Transmit + Ground Note: The pound symbol (#) indicates an active low signal. © National Instruments Corporation 3-15 NI PXIe-8130 User Manual...

  • Page 60: Front Panel Features

    The DRIVE LED indicates when an access to the internal hard – disk is occurring. Data Storage The NI PXIe-8130 has the following data storage features: • Internal Serial ATA hard drive – 60 GB minimum 2.5 in. notebook hard drive (40 GB minimum PATA drive on extended-temperature, 24/7 option controller) –...

  • Page 61: Common Configuration Questions

    This chapter answers common configuration questions you may have when using a NI PXIe-8130 embedded controller. General Questions What do the LEDs on the NI PXIe-8130 front panel mean? Refer to the LED status descriptions in the Front Panel Features...

  • Page 62: Boot Options

    There are some limitations when booting from a USB device. Windows XP can be installed from a USB CD/DVD-ROM, but earlier versions of Windows cannot. The NI PXIe-8130 BIOS configures the USB devices so that they will work in a DOS environment.

  • Page 63: Cables And Connections

    How do I plug both a PS/2 mouse and PS/2 keyboard into the controller? The NI PXIe-8130 has no PS/2 connector, and you need to use a USB Y-splitter cable as shown in Figure 4-1, or a similar device, to connect both a PS/2 mouse and PS/2 keyboard.

  • Page 64: Upgrade Information

    GPIB driver in the Device Manager. If you need more assistance, refer ni.com/support/install How do I install software from a CD? The compact size of the NI PXIe-8130 does not allow for an integrated USB CD/DVD-ROM drive. If you are using Windows XP, you have the following options: •...
  • Page 65 Note National Instruments has tested and verified that the DDR2 SO-DIMMs we sell work with the NI PXIe-8130. We recommend you purchase your DDR2 SO-DIMM modules from National Instruments. Other off-the-shelf DDR2 SO-DIMM modules are not guaranteed to work properly.

  • Page 66: Pxi Express Configuration

    3H3COSD8, What Peripheral Drivers Should I Use with My PXI or VXI Controller?, at ni.com My NI PXIe-8130 does not have an internal floppy drive. Is there a way to use an external drive? Yes. The NI PXIe-8130 controller supports and can boot from USB floppy drives.
  • Page 67 This chapter answers common troubleshooting questions you may have when using the NI PXIe-8130 embedded computer. What if the NI PXIe-8130 does not boot? Several problems can cause a controller not to boot. Here are some things to look for and possible solutions.
  • Page 68 Press <F9> to load BIOS defaults. Answer Y (Yes) to the verification prompt. Select Save and Exit Setup. As an alternative method, complete the following steps: Power off the chassis. Remove the controller from the chassis. NI PXIe-8130 User Manual ni.com...
  • Page 69 Do not leave the jumper on pins 2–3. Doing so decreases battery life. Also, the controller will not boot. 1 Clear CMOS Contents 2 Pin 1 3 Normal Operation (Default) Figure 5-1. Clearing the CMOS Contents © National Instruments Corporation NI PXIe-8130 User Manual...
  • Page 70 Specifications This appendix lists the electrical, mechanical, and environmental specifications of the NI PXIe-8130 embedded controller. Features NI PXIe-8130 AMD 2.3 GHz Turion 64 X2, (800 MHz HyperTransport Link) On-die L2 cache 512 KB x2 (512 KB per core) Dual-Channel DDR2 RAM, PC2 5300...
  • Page 71 (at 25 °C ambient temperature) Pollution Degree ........2 Indoor use only. Caution Clean the NI PXIe-8130 with a soft nonmetallic brush. Make sure that the device is completely dry and free from contaminants before returning it to service. NI PXIe-8130 User Manual ni.com...
  • Page 72 IEC-60068-2-2. Meets MIL-PRF-28800F Class 3 low temperature limit.) NI PXIe-8130 Extended Temperature Option Ambient temperature range .... –40 to 70 °C (Tested in accordance with IEC-60068-2-1 and IEC-60068-2-2. Meets MIL-PRF-28800F Class 3 limits.) © National Instruments Corporation NI PXIe-8130 User Manual...
  • Page 73 • IEC 61010-1, EN 61010-1 • UL 61010-1, CSA 61010-1 Note For UL and other safety certifications, refer to the product label or the Online Product Certification section. NI PXIe-8130 User Manual ni.com...
  • Page 74 To obtain product certifications and the DoC for this product, visit , search by model ni.com/certification number or product line, and click the appropriate link in the Certification column. © National Instruments Corporation NI PXIe-8130 User Manual...
  • Page 75 Appendix A Specifications Environmental Management National Instruments is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial not only to the environment but also to NI customers.
  • Page 76 Technical Support and Professional Services Visit the following sections of the award-winning National Instruments Web site at for technical support and professional services: ni.com • Support—Technical support at includes the ni.com/support following resources: – Self-Help Technical Resources—For answers and solutions,...
  • Page 77 You also can visit the Worldwide Offices section of to access the branch ni.com/niglobal office Web sites, which provide up-to-date contact information, support phone numbers, email addresses, and current events. NI PXIe-8130 User Manual ni.com...
  • Page 78 BIOS Basic Input/Output System—BIOS functions are the fundamental level of any PC or compatible computer. BIOS functions embody the basic operations needed for successful use of the computer’s hardware resources. © National Instruments Corporation NI PXIe-8130 User Manual...
  • Page 79 LCD computer displays and digital projectors. It was developed by an industry consortium, the Digital Display Working Group (DDWG). Extended Capabilities Parallel. EEPROM Electronically Erasable Programmable Read Only Memory. Electromagnetic Compatibility. Electromagnetic interference. NI PXIe-8130 User Manual ni.com...
  • Page 80 LabWindows/CVI or LabVIEW. interrupt A means for a device to request service from another device. interrupt level The relative priority at which a device can interrupt. © National Instruments Corporation NI PXIe-8130 User Manual...
  • Page 81 Mean time between failure. NI-488 or NI-488.2 The National Instruments software for GPIB systems. NI-DAQ The National Instruments software for data acquisition instruments. NI-VISA The National Instruments implementation of the VISA standard—An interface-independent software that provides a unified programming interface for VXI, GPIB, and serial instruments.
  • Page 82 SO-DIMM Small Outline Dual In-line Memory Module. SPI Bus Serial Peripheral Interface—A standard for controlling most any digital electronics that accept a clocked serial stream of bits. © National Instruments Corporation NI PXIe-8130 User Manual...
  • Page 83 Glossary Universal Serial Bus. Volts. Video Graphics Array—The minimum video display standard for all PCs. Watts. NI PXIe-8130 User Manual ni.com...
  • Page 84 (figure), 2-17, 5-3 figure, 2-25, 4-5 setting back to default, 5-2 DDR2 SO-DIMMs COM1 connector from National Instruments (note), 2-24, 4-5 connector locations and pinout (figure), 3-5 Declaration of Conformity (NI resources), B-2 connector signals (table), 3-5 diagnostic tools (NI resources), B-1...
  • Page 85 MAX (figure), 2-23 injector/ejector handle position features of PXI Express, 2-22 (caution), 2-2 files and directories installed on hard drive, 2-21 NI PXIe-8130 installed in a PXI Express floppy drive, using external floppy drive, 4-6 chassis (figure), 2-3 front panel procedure, 2-1...
  • Page 86 LabWindows/CVI, 1-6 data storage, 3-16 LEDs, front panel LEDs, 3-16, 4-1 description, 1-2 Linux support, 1-7 front panel LPT cable, connecting to NI PXIe-8130, 4-3 connectors, 3-1 dimensions, 3-2 features, 3-16 LEDs, 4-1 main BIOS setup menu, 2-5 system reset pushbutton, 3-16...
  • Page 87 OS installation serial port, 3-1 from USB CD/DVD-ROM, 2-26 serial/parallel port configuration BIOS overview, 2-26 menu, 2-10 setting up the NI PXIe-8130 BIOS, 2-4 shock and vibration specifications, A-4 socket S1 CPU, 1-4 parallel port SO-DIMM logic block, 1-4 connector, 3-1...
  • Page 88 PS/2 mouse and keyboard, 2-3 NI resources, B-1 video display, 5-2 Universal Serial Bus (USB) connector function, 1-4 connector location and pinout (figure), 3-10 connector signals (table), 3-10 overview (table), 3-1 © National Instruments Corporation NI PXIe-8130 User Manual...

This manual is also suitable for:

Ni pxi-8221Pxi expressPxie-8130

Table of Contents