System Cmos - National Instruments NI PXI-8109 User Manual

Chapter 2 Installation and Configuration

System CMOS

1 Push-Button Switch SW2
NI PXI-8109 User Manual
The NI PXI-8109 contains memory back up by a battery to store BIOS
configuration information.
Complete the following steps to clear the CMOS contents:
1. Power off the chassis.
2. Remove the controller from the chassis.
3. Press the push-button switch, as shown in Figure 2-3.
4. Wait one second.
5. Reinstall the controller in the chassis.
Figure 2-3. Clearing the CMOS Contents
2-18
1
ni.com