GPIB-ENET 8-Bit DIP Switch
8-Bit DIP Switch Descriptions
© National Instruments Corporation
This appendix describes how the 8-bit DIP switch on the back panel affects
the operation of the GPIB-ENET.
The 8-bit DIP switch is located on the back panel of the GPIB-ENET, as
shown in Figure B-1. The DIP switches set the operation mode of the
GPIB-ENET. The GPIB-ENET is shipped to you with the DIP switches set
for normal operation mode; all the switches are in the OFF position.
8 7 6 5 4 3 2 1 ON
Figure B-1. GPIB-ENET Back Panel Switches
Table B-1 shows the possible configurations of the GPIB-ENET DIP
switches and what each configuration indicates. The entries in bold italic
text represent the default settings.
Table B-1. DIP Switch Settings for Modes of Operation
Switch
8
7
10BASE-T
Position
ON
Extended Factory Test
OFF
Normal Operation
ON
Modify Mode
OFF
Normal Operation
B-1
Appendix
B
AUI
Indication
GPIB-ENET for Windows NT