How To Remove The Controller From The Pxi Chassis - National Instruments NI PXI-8109 User Manual

Chapter 2 Installation and Configuration
1
2
1 NI PXI-1042Q Chassis

How to Remove the Controller from the PXI Chassis

NI PXI-8109 User Manual
Figure 2-2 shows an NI PXI-8109 installed in the system controller slot of
a National Instruments PXI-1042Q chassis. You can place PXI devices in
any other slots.
3
2 NI PXI-8109 Controller
Figure 2-2. NI PXI-8109 Controller Installed in a PXI Chassis
The NI PXI-8109 controller is designed for easy handling. To remove the
unit from the PXI chassis, complete the following steps:
1. Power off the chassis.
2. Loosen the 4 bracket-retaining screws in the front panel.
3. Press the injector/ejector handle down.
4. Slide the unit out of the chassis.
3 Injector/Ejector Rail
2-4 ni.com