Advertisement
1853405
Medford Magazine Rack
A.
Left Assembly
B.
Right Assembly
E.
Bottom Assembly
M.
Allen Head Bolts
4. Attach Bottom Assembly (E) Place the item upside down on a soft surface. Put the Bottom Assembly (E) upside
down on the bottom of item. Make sure the part sticking out of Bottom Assembly (E) faces front. Adjust and align
the pre-drilled holes in end of the Bottom Assembly (E) with the pre-threaded holes in the Left & Right Assemblies
(A, B). Secure with Allen Head Bolts (M), Lock Washers (O) and Flat Washers (N) using Allen Head Wrench (P).
See Illustration # 3.
Page 4 of 5
1 pc
N.
Flat Washers
1 pc
O.
Lock Washers
1 pc
P.
Allen Head Wrench
4 pcs
4 pcs
4 pcs
1 pc
Illustration # 3
R-4-21-04
Advertisement
