Advertisement
1853405
Medford Magazine Rack
A.
Left Assembly
B.
Right Assembly
C.
Front Assembly
D.
Back Assembly
F.
Feet
1. Attach Feet (F) Align the exposed threads of the Feet (F) with pre-threaded holes in the Left & Right Assemblies
(A, B). Tighten by turing in clockwise direction. See Illustration #1.
2. Attach Connecting Bolts (J) Place the Left & Right Assemblies (A, B) on a soft surface. Align the exposed
threads on the Connecting Bolts (J) with the pre-drilled holes in the top of Left & Right Assemblies (A, B). Tighten
by turning in a clockwise direction using the Flat Head Screwdriver (Q). See Illustration # 1.
3. Attach Front & Back Assemblies (C, D) Align the pre-drilled holes in the top ends of Front & Back Assemblies
(C, D) with the Connecting Bolts (J). Make sure the dowels of bottom stretchers in the Front & Back Assemblies
(C, D) align with the pre-drilled holes in the bottom of Left & Right Assemblies (C, D). Insert the Eccentric Cams
(K) into the pre-drilled holes of Front & Back Assemblies (C, D). Make sure the groove in the Eccentric Cams (K)
faces out and the arrow points towards the Connecting Bolts (J). Use the Phillips Head Screwdriver (R) to adjust
the Eccentric Cams (K) and to lock the inserted Connecting Bolts (J) in place by turning in a clockwise direction.
Cover the Eccentric Cams (K) with Plastic Covers (L). See Illustration # 2.
Illustration # 1
Page 3 of 5
Attach Feet and Front & Back Assemblies
1 pc
1 pc
1 pc
1 pc
4 pcs
Attach Bottom Assembly
J.
Connecting Bolts
K.
Eccentric Cams
L.
Plastic Covers
Q.
Flat Head Screwdriver
R.
Phillips Head Screwdriver
4 pcs
4 pcs
4 pcs
1 pc
1 pc
Illustration # 2
R-4-21-04
Advertisement
