Advertisement
Quick Links
1851148
Canterbury Console
Parts and Hardware List
A.
Top Assembly
B.
Legs
C.
Allen Head Bolts
D.
Lock Washers
E.
Flat Washers
F.
Allen Head Wrench
G.
Finial
H.
Key
∗
Please make sure that you have all the parts and hardware indicated above before you begin assembly
of this item.
∗
Use the hardware illustrations to determine correct piece and size.
∗
This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗
This item may require periodic tightening.
Hardware Illustrations
Page 1 of 3
1 pc
4 pcs
8 pcs
8 pcs
8 pcs
1 pc
1 pc
2 pcs
R2-4-18-00
Advertisement
Related Manuals for BOMBAY 1851148
Summary of Contents for BOMBAY 1851148
- Page 1 1851148 Canterbury Console Parts and Hardware List Top Assembly 1 pc Legs 4 pcs Allen Head Bolts 8 pcs Lock Washers 8 pcs Flat Washers 8 pcs Allen Head Wrench 1 pc Finial 1 pc 2 pcs ∗ Please make sure that you have all the parts and hardware indicated above before you begin assembly of this item.
- Page 2 1851148 Canterbury Console Pull Out Drawers Parts required A. Top Assembly 1 pc Pull Out Drawers Place the Top Assembly (A) up side down on the floor. Remove the wood dowels from the slide rails and pull out the drawers from Top Assembly (A). See Illustration # 1.
- Page 3 1851148 Canterbury Console Parts required A. Top Assembly 1 pc Flat Washers 8 pcs B. Legs 4 pcs Allen Head Wrench 1 pc C. Allen Head Bolts 8 pcs Finial 1 pc D. Lock Washers 8 pcs 2. Attach Legs (B) Align the pre-threaded holes in the Legs (B) with the pre-drilled holes in the corner blocks between the aprons and secure in place with the Allen Head Bolts (C), Lock Washers (D), Flat Washers (E) using the Allen Head Wrench (F).