Advertisement
Table of Contents
1853612
Sabine Occasional Table-AM
Parts List
A.
Top Assembly
B.
Side Assemblies
C.
Connector
D.
Wood Caps
E.
Allen Head Bolts
F.
Lock Washers
G.
Flat Washers
H.
Allen Head Wrench
I.
Optional Allen Head Screwdriver Bit
∗
Please make sure that you have all the parts and hardware indicated above before you begin assembly of this item.
∗
This item should be assembled on a soft surface to prevent scratching the finish during assembly.
*
This item may require periodic tightening.
*
Take care not to overtighten bolts if using supplied Allen Head Screwdriver Bit.
Hardware Illustrations
E. Allen Head Bolt
G. Flat Washer
Page 1 of 2
1 pc
2 pcs
1 pc
2 pcs
6 pcs
6 pcs
6 pcs
1 pc
1 pc
F. Lock Washer
R2-12-13-04
Advertisement
Table of Contents
Related Manuals for BOMBAY 1853612
Summary of Contents for BOMBAY 1853612
- Page 1 1853612 Sabine Occasional Table-AM Parts List Top Assembly 1 pc Side Assemblies 2 pcs Connector 1 pc Wood Caps 2 pcs Allen Head Bolts 6 pcs Lock Washers 6 pcs Flat Washers 6 pcs Allen Head Wrench 1 pc Optional Allen Head Screwdriver Bit 1 pc ∗...
- Page 2 1853612 Sabine Occasional Table-AM Assembly Instructions 1. Attach Connector (C) Insert the Connector (C) into the holes in the middle of Side Assemblies (B). Note: Side of Side Assembly (B) with label “inside” face inwards. Insert the Allen Head Bolts (E) with Lock Washers (F) and Flat Washers (G) through the holes in the Side Assemblies (B) into the pre-threaded holes in the Connector (C).
Need help?
Do you have a question about the 1853612 and is the answer not in the manual?
Questions and answers