Routine Maintenance (Kohler-Powered Units) - Miller Bobcat 225 Owner's Manual

9-2. Routine Maintenance (Kohler-Powered Units)

Note
Follow the storage procedure in the engine owner's manual if the unit will not be used for an
extended period.
Wipe up spills.
Every 20 h
Check and clean optional
spark arrestor screen. See
Section 9-7.
Change oil. See Section 9-4
and maintenance label.
Clean cooling system. See
Engine Manual.
Change oil filter. See Section
9-4 and maintenance label.
Check spark plugs.
Repair or replace cracked
cables.
OM-4434 Page 34
Every 8 h
Every 50 h
Clean and tighten weld
terminals.
Every 100 h
Every 200 h
Every 500 h
Every 1000 h
Blow out or vacuum inside.
During heavy service, clean
monthly.
Y Stop engine before maintaining.
.
See Engine Manual and Maintenance Label for impor-
Recycle
tant start-up, service, and storage information. Ser-
engine
vice engine more often if used in severe conditions.
fluids.
* To be done by Factory Authorized Service Agent.
Check fluid levels.
See Section 5-3.
Every 25 h
Service air cleaner
wrapper (foam element).
See Section 9-3.
Check air cleaner element.
See Section 9-3.
Clean and tighten battery
connections.
Replace fuel filter. See
Section 9-4.
Replace unreadable labels.
Service welding generator
brushes and slip rings. Service
more often in dirty conditions.*
OR