Plan For Moving And Uncrating The Printer; Moving Equipment And Personnel - HP Jet Fusion 340 Product Documentation Site Preparation Manual

3

Plan for moving and uncrating the printer

This section will help you to determine whether the printer can be moved in the crate to the final location, or
whether it will need to be uncrated and then rolled.
CAUTION:
Failure to provide the required moving and lifting equipment could result in personal injury or printer damage
during installation.

Moving equipment and personnel

NOTE: The printer should be uncrated as close to the installation location as possible.
You may decide to hire a specialist mover, who should be familiar with your site and should read the moving
●
information in this guide.
Ensure that you have the equipment needed to handle the crate: HP recommends a fork lift or pallet jack.
●
CAUTION:
which would damage the printer.
The printer should be moved in the upright position at all times.
●
4 Chapter 3 Plan for moving and uncrating the printer
Unloading and moving the printer and all system components is your responsibility and not HP's.
After the printer has been uncrated, do not attempt to move it with a fork lift or pallet jack,
ENWW