HP Jet Fusion 340 Product Documentation Site Preparation Manual page 44

Other required supplies and equipment
50 sheets of A4 or US Letter plain inkjet paper
●
Distilled or deionized water, 10 liters (3 gallons)
●
IMPORTANT:
Razor scraper
●
Disposable lint-free wipes
●
Disposable antistatic alcohol wipes
●
An explosion-protected vacuum cleaner with the following minimum specifications:
●
Air flow: 186 m³/h
–
Depression: 19.6 kPa
–
Power: 1193 W
–
A bead-blasting machine. HP recommends a bead-blasting machine with the following specifications:
●
Manual or automatic operation
–
Air pressure in the range 2–5 bar (29–72.5 psi)
–
Glass beads of diameter 210–297 μm (50–70 mesh)
–
HP's recommended bead blasting system requires a compressed air source of 13–16 CFM to operate at the
●
recommended air pressure of 2.8 bar (40 psi). See the documentation of your bead blasting system for
compressed air requirements.
Personal protective equipment for users and service engineers, according to your environmental, safety,
●
and regulatory guidelines
Recommended for use and maintenance of the printer
Disposable antistatic alcohol wipes
●
Disposable lint-free wipes
●
Lint-free cloth
●
Scraper
●
T20 screwdriver
●
Brass and soft brushes
●
Metal picks
●
Basket
●
Bead and air blaster
●
Explosion-protected vacuum cleaner
●
40 Chapter 6 Plan for printer installation in the production area
Use only distilled or deionized water: any other kind of water could damage the printer.
ENWW