Introduction; What To Expect - HP Jet Fusion 340 Product Documentation Site Preparation Manual

1

Introduction

This document provides site preparation details to help ensure a successful printer delivery and installation. The
site preparation process is your responsibility and must be completed before product delivery occurs.
NOTE: It is important to read the information provided in this guide thoroughly and ensure complete
compliance with all installation and operation prerequisites, safety procedures, warnings, cautions, and local
regulations.
At the end of this document is a checklist, which you should fill out, sign, and return to the reseller or HP sales
representative.

What to expect

System configuration
Your printer is supplied almost fully assembled and ready for the simple installation procedures performed by
your support engineer. It comes complete with printhead(s) and a printhead cleaning module.
NOTE: See Required supplies and equipment on page
available the minimum necessary supplies at the time of installation.
During installation
On the day of installation, a support representative will be on site to perform the following tasks:
1. Set up the printer for first power-on.
2. Perform all the alignment calibrations.
3. Connect the printer and designated computer to your local network, ensuring connectivity to your HP 3D
Center by PrintOS account.
4. Run one or more print tests to validate the installation.
5. Provide basic operation training.
6. Help you to sign the Certificate of Installation that will activate your warranty.
Additional documentation
The following documents can be downloaded from http://www.hp.com/go/jetfusion340/manuals/,
http://www.hp.com/go/jetfusion540/manuals/
manuals/:
Site preparation guide (this document)
●
Introductory information
●
ENWW
39. You, as the customer, must order and have
or http://www.hp.com/go/jetfusion580color/
What to expect 1