HP Jet Fusion 340 Product Documentation Site Preparation Manual page 47

Step Site preparation phase and tasks
My site has a fire extinguisher in the printing
6 production area and in the materials storage room (if
applicable).
There is an emergency exit in the print production
7
area with easy access and free from obstructions.
I have an explosion-protected vacuum cleaner
8 compatible with the material that I intend to use, or I
will have it ready prior to installation date.
The people who will operate the printer have
appropriate training to be aware of the hazards to
9
which they may be exposed, and they can take
appropriate measures to minimize the risks.
Room space and flooring requirements
The floor in the installation space meets the load-
bearing capacity specifications for printer weight (see
10
Floor characteristics on page
sources of vibration.
The printing space meets the minimum requirements
11
described in Printer space requirements on page
Environmental requirements
The room in which the printer will operate has the
minimal ventilation standard (ACH) required by local
12
regulations and/or HP recommendation in the site
preparation guide.
The print production area meets the temperature
and humidity requirements described in
13
Environmental specifications and considerations
on page 9.
The print production area meets the AC cooling
14 recommendation described in
on page 12.
I have selected the layout option in the comments
15 column to the right that better represents my
printing area layout.
Electrical installation
I have scheduled the certified electrician to prepare
the circuit and build a power cable that meets the
16
electrical specification described in the site
preparation guide, before the day of installation.
A certified electrician will install a circuit breaker that
meets, or verify that the existing circuit breaker
17
meets, the electrical specifications described in the
site preparation guide.
ENWW
True
9), and is free from
7.
Air conditioning
Not true Comments
HP highly recommends having a fire extinguisher
at or near the printing production area and one
more in the materials storage room if applicable.
Go to the next step.
HP highly recommends having an emergency exit
in the print production area with easy access and
free from obstructions. Go to the next step.
HP highly recommends having an explosion-
protected vacuum cleaner compatible with the
material that you intend to use. Do not use any
other vacuum cleaner that is not explosion-
protected. Go to the next step.
HP highly recommends training users of the printer
and other post-processing equipment about the
hazards in the printing environment and how to
minimize risks. Go to the next step.
The printer will not be installed until this statement
is true.
The printer will not be installed until this statement
is true.
The printer will not be installed until this statement
is true.
The printer will not be installed until this statement
is true.
The printer will not be installed until this statement
is true.
Please select only one. See
recommendation on page
Small room layout. Option 1: Direct duct from
❑
the lamp.
Small room layout. Option 2: No direct
❑
connection from the lamp.
Large room layout. Option 3: Large room or
❑
multiple-printer configuration.
The printer will not be installed until this statement
is true.
The printer will not be installed until this statement
is true.
Site preparation guide checklist
Ducts and HVAC
48.
43