Set Up - VTech Analog Next Gen Series User Manual

Set up

Default settings are indicated by asterisks (*).
Setting
Handset earpiece volume
Speakerphone volume
Ringer volume
Ringer tone
Voicemail voltage detection
Ringer tone
There are 3 ringer tone options.
To change the ringer tone:
1. Turn the telephone base over with the bottom side facing up. Remove the mounting bracket if
it is in desktop position. To remove the mounting bracket, firmly push both tabs downward and
pull up until they release from the grooves.
2. Slide the ringer tone switch to select the desired detented position using a narrow object such
as a standard screwdriver.
3. Install the mounting bracket accordingly.
Options
1, 2*, 3, 4
1, 2, 3, 4, 5*, 6, 7, 8
Low, Medium*, High
Tone 1*, Tone 2, Tone 3
Disable voicemail voltage detection,
Periodic low voltage pulse detection
method,
Steady high voltage and periodic
high voltage pulse detection method
EN - 14
Adjustable by
User and administrator
User and administrator
Administrator only
Administrator only
Administrator only