VTech Analogue Contemporary Series User Manual page 10

Voicemail voltage detection
There are 3 options to set the voicemail voltage
detection on the telephone base.
To disable the voicemail voltage detection
1. Use a narrow object to unplug all the jumpers
from the telephone base.
2. Place the sticker back in place.
To set the voicemail voltage detection by
the periodic low voltage pulse detection
method
1. Use a narrow object to unplug all the jumpers
from the telephone base. Then plug the
jumpers into ,
2. Place the sticker back in place.
To set the voicemail voltage detection by
the steady high voltage and periodic high
voltage pulse detection method
1. Use a narrow object to unplug all the jumpers
from the telephone base. Then plug the
jumpers into ,
2. Place the sticker back in place.
and .
and .
Speed Dial keys
There are up to 11 programmable guest-service
(Speed Dial) keys.
To program a Speed Dial key
1. Remove the faceplate and overlay if they
are on the telephone base. Lift the handset,
then press the recessed PROGRAM key.
The MUTE key flashes when in administrator
mode.
2. Press the desired Speed Dial key where the
telephone number is to be stored. You hear
a beep.
3. Enter the telephone number (up to 16 digits).
• To insert a pause in the stored number, press
the recessed PAUSE key.
4. The telephone
automatically when 16 or 21 digits are
entered. When the number has less than
16/21 digits, press the recessed PROGRAM
key again. You hear a beep as confirmation.
If the number is more than 16/21 digits, the
target programming memory will be erased.
EN - 10
stores the number