Table of Contents
Advertisement
9. Environmental Specifications
9.1. Temperature
Scanning performance is guaranteed when the range of ambient temperature around the scanner is
the following values:
Operating temperature
Storage temperature
9.2. Humidity
Scanning performance is guaranteed when the range of ambient humidity around the scanner is the
following values:
Operating humidity
Storage humidity
9.3. Ambient Light Immunity
Scanning performance is guaranteed when the range of illumination on a bar code surface is
between zero and the following values:
Incandescent light
Fluorescent light
Sunlight
<Conditions>
Bar code
Distance
Angle
Curvature
Power supply voltage
* Be sure that the direct light or specular reflection from the light source does not enter the light
receiving section of the scanner.
9.4. Dust and Drip Proof
IEC IP42 equivalent
Protection against solid objects: Level 4 equivalent
Protected against solid objects greater than 1.0 mm
Protection against liquids: Level 2 (JIS IPX2) equivalent
Protected against dripping water from the vertical when tilted up to 15°
* () is JIS drip-proof type.
9.5. Vibration Strength (without packing)
There shall be no sign of malfunction after the following vibration test.
Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated
2
velocity of 19.6m/s
(2.0 G) for 30 minutes (60 minutes per cycle) in the non-operating state. Repeat
this in each X, Y and Z direction.
: 0 ~ 50
°C
: -20 ~ 60
°C
: 20 ~ 85% RH (no condensation, no frost)
: 20 ~ 85% RH (no condensation, no frost)
: 10,000 lx
: 10,000 lx
: 100,000 lx
: JAN (resolution 0.26 mm) specified in Section 8.1.
: 72 mm from the front edge of the camera module
: α = 0°, β =＋15°, γ = 0°
: R = ∞
: 3.7 V
13
OPC-3301n
Specifications Manual
Advertisement
Table of Contents
