Environment Protection - Eico Udine Instruction On Mounting And Use Manual

9. Abnormality and Solution
Fault
The light is on,
but the motor
does not work
Light does not
work, the motor
does not work
Oil drops from the
metal grease filter
A shake of the
body
Insufficient
suction
The machine
inclines

Environment Protection

According to the European waste regulation 2012/ 19/EU this symbol on the product or on
its packaging indicates that this product may not be treated as household waste. Instead, it
should be taken to the appropriate collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling this product, please check with your Local
Authority or retailer for recycling advice.
Cause
The leaf blocked
The capacitor damaged
The motor jammed bearing
damaged
The internal with of t h e
motor off or a bad smell from
the motor
Besides the above-mentioned, check the following:
Light damaged
Power cord loose
Heavily fouled filter
The leaf is damaged and
causes shaking
The motor is not tightly hanged
The body is not tightly hanged
The distance between the
body and the gas top is too
long
Too much ventilation from
open doors or windows
The fixing screw is not tight
enough
The hanging screw is not tight
enough
8
Solution
Get rid of the blocking
Replace capacitor
Replace motor
Replace motor
Replace lights
Connect the wires as
per the electric
diagram
Immediately clean or
replace the metal
grease filter
Replace the leaf
Lock the motor tightly
Fixed the body tightly
Readjust the distance
Choose a new place
and
resemble the machine
Tighten the hanging
screw and make it
horizontal
Tighten the hanging
screw and make it
horizontal