Cut-Off Bar; Bolt (1/4 X 1-3/4 Inches); Locknut (1/4 Inch) - Toro 03185 Installation Instructions Manual

1. Bolt (5/16 x 2-1/4 inch)
2. Right basket bracket with guide
5
Installing the Cut-off Bar
Parts needed for this procedure:
1

Cut-off bar

4

Bolt (1/4 x 1-3/4 inches)

4

Locknut (1/4 inch)

Procedure
1. Remove the 4 flange-head bolts securing the front
grass shield and deflectors to the cutting unit frame
(Figure 6).
Figure 5
3. Flange nut (5/16 inch)
4. Carrier frame
1. Grass shield
2. Remove the grass shield.
3. Loosely mount the cut-off bar to the cutting unit frame
5
5. Left basket bracket with bracket
Figure 6
with 4 bolts (1/4 x 1-3/4 inches) and 4 locknuts (1/4
inch) (Figure 7).
2. Deflectors
g012217
g012218