Toro 03185 Installation Instructions Manual page 4

Note: The carriage bolts and flange bolts are shipped
installed on the guide assembly.
Rear Cutting Unit
Important: Use the red colored rear stop-basket
when operating in rugged terrain to help retain
the rear basket.
5. Insert the right basket bracket with guide assembly
onto the right end of the cutting unit carrier frame
tube (Figure 5).
Note: The carriage bolts and flange bolts are shipped
installed in the middle position on the bracket assembly
to ease final adjustment later.
6. Align the holes in the basket bracket with the hole in
the carrier frame tube and secure with a bolt (5/16 x
2-1/4 inch) and flange nut (5/16 inch) positioning as
shown in Figure 5.
1. Carrier frame
2. Bracket assembly
7. Insert the left basket bracket with bracket assembly
8. Align the holes in the basket bracket with the hole in
Figure 4
3. Guide assembly
4. Bolt (5/16 x 1 inch)
4
Note: The bolt must be threaded through the far wall
of the tube.
onto the left end of the cutting unit carrier frame tube
(Figure 5).
Note: The carriage bolts and flange bolts are shipped
installed in the middle position on the bracket assembly
to ease final adjustment later.
the carrier frame tube and secure with a bolt (5/16 x
2-1/4 inch) and flange nut (5/16 inch) positioning as
shown in Figure 5.
Note: The bolt must be threaded through the far wall
of the tube.
5. Flange nut (5/16 inch)
g012216