Removing The Bagger; Using The Draw Bar - Toro 79390 Operator's Manual

Removing the Bagger

CAUTION
Failing to remove the front bagger weights
and operating the machine without the bagger
attachment may cause an unstable condition which
could result in a loss of control.
• Always remove the front weights when removing
the bagger attachment.
• If you remove the bagger attachment, remove
the front weights.
The bagger can be removed by repeating the Setup sections
from all installed bagger related kits in reverse order. If
weights are installed, always remove the front bagger weights
when removing the bagger attachments.
Note: It is only necessary to remove the cutoff baffle when
installing a mulching kit.

Using the Draw Bar

The bagger support bracket has a draw bar feature that can
be used for towing.
•
Read and understand all the operating instructions of the
machine.
•
When turning, slow down and observe the clearance.
•
Make wide turns and keep towed equipment clear of the
towing vehicle.
•
The maximum draw bar pull is 36 kg (80 lb).
•
Excessive draw bar pull may cause hydrostatic
transmission failure.
g033033
1. Bagger-support bracket with draw bar
1
Figure 32
17