Tips On Beaming Information - Sony CLIE PEG-NX60 Handbook

Beaming between your Sony CLIÉ Handheld and another Palm OS
Receiving beamed information
1
Turn on your CLIÉ handheld and point the IR port of your
CLIÉ handheld directly to the IR port of another Palm OS
PDA device.
The Beam dialog box is displayed and beaming of data starts.
2
Select the category where you want to save the received
data.
You can also create a new category to save the data to, or save it in the
Unfiled category.
3
Tap Yes.
The data is saved.
Note
When Beam Receive in the Preferences screen is set to Off, you cannot receive data
using the beaming feature. Prior to beaming data, set Beam Receive to On.

Tips on beaming information

• Data or applications received by beaming are saved in the Unfiled category.
• You can press the Address Book
your business card.
• You can use Graffiti
and then tap
Beaming
button for about two seconds to beam
®
writing to beam the current entry (
).
®
PDA
then , or
142