Sony CLIE PEG-NX60 Handbook page 116

Performing a HotSync
6
Place your CLIÉ handheld on the cradle and press the
HotSync
The computer information (Primary PC name and Primary PC address (IP
address)) is transferred to your CLIÉ handheld.
When you perform a HotSync
identifies the computer based on the information transferred.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for a HotSync
via the LAN.
1
Rotate the Jog Dial™ navigator to select the HotSync icon
and press the Jog Dial™ navigator on the Application
Launcher screen.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2
Tap Local.
3
Tap the Menu
4
Tap LANSync Prefs in the Options menu.
The LANSync Preferences screen is displayed.
5
Tap LANSync.
Exchanging and updating data using a HotSync
®
HotSync operations)
®
operation via LAN (LANSync)
button.
®
operation via LAN, your CLIÉ handheld
icon.
Continued on next page
• • • • • • • • • • • • • • • • • • •
®
operation (Other
®
operation
116