Performing An Ir Hotsync Operation; Performing An Ir Hotsync ® Operation - Sony CLIE PEG-NX60 Handbook

Performing an IR HotSync
You can use the IR (infrared) port of your CLIÉ handheld to perform an IR
®
HotSync operation with a computer equipped with an IrDA (Infrared Data
Association) IR port. An IR HotSync
®
HotSync operation without using the cradle.
Prior to performing an IR HotSync
Check the following items.
• Your computer is equipped with an infrared port supporting the IrDA
standard.
• The infrared port of your computer is enabled for Windows operating system
use.
• Check the port number allocated to the infrared port.
• The infrared port number is available in the Infrared Monitor in the Control
Panel.
For details on the Infrared Monitor, refer to the manual of your computer or
the Windows online help.
Preparing your computer
To perform an IR HotSync
IR HotSync
For Windows 2000 Professional/Windows XP
1
Click the HotSync
(bottom-right corner of the taskbar) and check IR.
IR HotSync
For Windows 98 Second Edition/Me
1
Click the HotSync
(bottom-right corner of the taskbar) and check Local Serial.
Exchanging and updating data using a HotSync
®
HotSync operations)
®
operation, you need to allocate a virtual port to an
®
operation.
®
operation is enabled.
®
operation
®
operation enables you to perform a
®
operation
icon in the Windows task tray
icon in the Windows task tray
®
operation (Other
Continued on next page
• • • • • • • • • • • • • • • • • • •
101