Lenovo ThinkSystem SE350 V2 Manual page 198

• FQXPMOS0009K: Current System Boot Mode is Legacy. LXPM OS installation only support UEFI
Mode.
Severity: Warning
User Action:
1. Change boot mode to UEFI mode
2. Retry OS deployment.
• FQXPMOS0028I: [arg1] OS installed
Severity: Info
User Action:
Information only; no action is required.
• FQXPMSD0001M: HDD Test was interrupted by the host with a hardware or software reset
Severity: Error
User Action:
1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and
cables.
2. Ensure device firmware is at the latest level.
3. Retry the test.
4. If the problem persists, contact technical support.
• FQXPMSD0002M: A fatal error or unknown test error occurred while the device was executing its
self-test
Severity: Error
User Action:
1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and
cables.
2. Ensure device firmware is at the latest level.
3. Retry the test.
4. If the problem persists, contact technical support.
• FQXPMSD0003M: self-test completed having a test element that failed and the test element that
failed is not known.
Severity: Error
User Action:
1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and
cables.
2. Ensure device firmware is at the latest level.
3. Retry the test.
4. If the problem persists, contact technical support.
• FQXPMSD0004M: self-test completed having the electrical element of the test failed.
Severity: Error
194
ThinkSystem SE350 V2 Messages and Codes Reference