System Menu - Elation PROTEUS BEAM WMG PRB162 User Manual

*Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings.
MAIN MENU SUB MENU
Set Dmx Address
Dmx Value
FUNCTION
Secondary Mode
Auto Program
Time Information
INFORMATION
Temperature Info
Ethernet IP
Fan Info
Encode Info
Software Version
Error Info
Lamp ON/OFF
Automatic ON
LAMP
Lamp ON via DMX
CONTROL Lamp OFF via DMX
Max ON at Temp
Lamp OFF Temp
Status Settings
Service Setting
PERSONALITY
Display Setting
Temperature C/F
Initial Status
Select Signal
Set Universe
Set E-FLY Chn
Reset Default
SYSTEM MENU - Supports Software Versions: ≥ 1.3.1
Features are subject to change without any prior written notice.
OPTIONS / VALUES
A001~AXXX
ALL......
Secondary1, Secondary2, Secondary3
Primary / Alone
Current Time
Total Run Time
Last Run Time
Lamp Hours
Lamp Off Time
LastRun Password
Clear Last Run
LampTime Password
Clean Lamp Time
Head Temperature
Base Temperature
XXX . XXX . XXX . XXX
1U_FAN1 - 6U_FAN2
PAN ENCODE:, TILT ENCODE:...
1U01 - 6U01 ≥V1.3.1
Error Record 1 ~ Error Record 10
ON/OFF
ON/OFF
ON/OFF
ON/OFF
20~79°C (45°C) / 68 ~ 174°F (113°F)
80~139°C (130°C) / 176 ~ 282°F (266°F)
Address via DMX
No DMX Status
Pan Reverse
Tilt Reverse
Pan Degree
Feedback
Hibernation
Password
RDM PID
Ethernet IP
Ether Mask IP
Clear Err. Info
DFLT Pow. LampOn
Shutoff Time
Display Reverse
Key Lock
Celsius/Fahrenheit
CONTROL =XXX
DMX ONLY
DMX & E-FLY
E-FLY & OUT
Art-Net on IP2
Art-Net on IP10
sACN
000 - 255
00 - 15
ON/OFF
(Default Settings in BOLD)
DMX Address Setting
DMX Value Display
Secondary Setting
Auto Program
XXXX (Hours) Fixture Run Time From Power ON
XXXX (Hours) Fixture Total Run Time
XXXX (Hours) Fixture Last Run Time
XXXX (Hours) Lamp Running Time
XXXX (Hours) Lamp Off Time
(PSWD Required)
Password=038
ON / OFF Clear Fixture Last Run Time
(PSWD Required)
Password=038
ON / OFF Clear Lamp Last Run Time
XXX C° / F ° Temperature in Fixture Head
XXX C° / F °
Temperature in Fixture Base
XXX . XXX . XXX . XXX Displays Fixture Ethernet Address
RPM Speeds of Head/Base Fans
Software Version
Fixture Last 10 Error Codes
Lamp ON/OFF
Lamp ON/OFF when Power ON
Lamp ON via DMX
Lamp OFF via DMX
Lamp Restart at Temp
Lamp OFF at Temp
ON/OFF
Address Via DMX
Close / Hold / Auto Fixture State When NO DMX Signal
ON/OFF Pan Reverse Movement
ON/OFF Tilt Reverse Movement
630/540 Pan Degree Select
ON/OFF Movement Feedback
OFF, 01M~99M, 15M Stand By Mode
Service Password
Password=050
22A6xxxxxxxx RDM PID Code (PSWD Required)
XXX.XXX.XXX.XXX Enter Fixture IP Address
XXX.XXX.XXX.XXX Enter Fixture Subnet Mask
ON/OFF Clear Error Info (PSWD Required)
ON/OFF Set Default Lamp Power State to ON
02~60m 05m Display Shut Off Time
AUTO/ON/OFF Display Reverse 180º
ON/OFF Control Panel Lock Out
Temperature Switch Between C˚/ F˚
Initial Effect Position
Control via DMX only
Control via DMX and E-FLY
Control via E-FLY and sends DMX Out
Control via Ethernet 002 IP Address
Control via Ethernet 010 IP Address
Control via sACN Protocol
Set ArtNet Universe
Set E-FLY Wireless Channel
Restore Factory Settings
Password=011
33
DESCRIPTION
(PSWD Required)