Table of Contents
Advertisement
I N S T A L L A T I O N
DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!
Fixture MUST be installed following all local, national, and country commercial electrical and
construction codes and regulations. Before rigging/mounting the fixture to any metal truss/structure
or placing the fixture on any surface, a professional equipment installer MUST be consulted to
determine if the metal truss/structure or surface is properly certified to safely hold the combined weight
of the fixture, clamps, cables, and accessories.
Overhead fixture installation must always be secured with a secondary safety attachment; such as an
appropriately rated safety cable that meets all local, national, and country codes and regulations.
Fixture ambient operating temperature range is -4° to 113°F. (-20° to 45°C)
Do not use this fixture outside this temperature range.
Fixture should be installed in areas outside walking paths, seating areas, or away from areas were
unauthorized personnel might reach the fixture by hand.
NEVER stand directly below the fixture when rigging, removing or servicing.
Allow approximately 15 minutes for the fixture to cool down before serving.
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 feet (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L C O N N E C T I O N S
A q u a l i f i e d e l e c t r i c i a n s h o u l d b e u s e d f o r a l l
e l e c t r i c a l c o n n e c t i o n s a n d / o r i n s t a l l a t i o n s .
MINIMUM DISTANCE TO OBJECTS/SURFACES
M U S T B E 3 3 F E E T ( 1 0 M E T E R S )
MAXIMUM TEMPERATURE OF EXTERNAL SURFACE
2 1 2 ° F ( 1 0 0 ° C )
27
Advertisement
Table of Contents
