Elation PROTEUS BEAM WMG PRB162 User Manual page 12

L A M P I N S T A L L A T I O N
WARNING! LAMP REPLACEMENT SHOULD ONLY BE DONE BE A TRAINED TECHNICIAN.
1. Turn OFF power and allow approximately 60 minutes for the fixture to cool down.
TILT Lock
PAN Lock
2. Before removing rear cover, place the head in a right-angle horizontal position and engage both the
PAN and TILT locks for added stability while replacing the lamp.
3. Remove (4x) 3mm hex-head screws to remove rear cover.
12