Subaru LEGACY OUTBACK 2017 Owner's Manual page 46

■ Decreasing the set vehicle target speed
●
Using the RES/SET switch
Push the RES/SET switch in the following
way while you are driving with Adaptive
Cruise Control on:
Push the SET/- switch towards the position
(1) briefly: the set vehicle speed will
decrease in increments of 1 MPH (1 km/h)
every time the button is pushed.
Push the SET/- switch towards the position
(1) for longer: the set vehicle speed will
decrease in increments of 1 MPH (1 km/h)
while the button is being pushed.
Push the SET/- switch towards the position (2) briefly: the set vehicle speed will decrease
to the next 5 MPH (5 km/h) decrement every time the button is pushed.
Push the SET/- switch towards the position (2) for longer: the set vehicle speed will
decrease to the next 5 MPH (5 km/h) decrement while the button is being pushed and will
continue to lower target speed in 5 MPH (5 km/h) decrements as long as the button is
pushed.
The set vehicle target speed is shown on the EyeSight display.
●
Using the brake pedal
(1) Depress the brake pedal to decrease the vehicle speed. (Adaptive Cruise Control will be
canceled and
(2) When the desired speed is reached, press the RES/SET switch to the "SET/-". The
speed at the time of pressing the switch will be set as the new vehicle speed, and it
appears in the EyeSight display area.
■ Accelerating temporarily
Depress the accelerator pedal to accelerate temporarily.
When the accelerator pedal is released, the vehicle returns to the set vehicle speed.
will be turned off.)
Adaptive Cruise Control
S01991
43